2010 Ford F150 Regular Cab Owner Guide 3rd Printing - Page 127
2010 Ford F150 Regular Cab Manual
Page 127 highlights
Locks and Security • The AdvanceTrac system cannot be turned off. When this optional setting is on, the MyKey™ user will not be able to deactivate the system. Note: It may be beneficial to deactivate the AdvanceTrac system if the vehicle is stuck in snow, mud, or sand. Create a MyKey™ To program MyKey™ on one of the keys programmed to the vehicle, insert the key that you want to make a MyKey™ into the ignition. Turn the ignition on. Use the message center buttons or the select/reset stem to do the following: 1. Press SETUP or select/reset stem until PRESS RESET TO CREATE MYKEY is displayed. 2. Press and release the RESET button, or press and hold the select/reset stem until HOLD RESET TO CONFIRM MYKEY will be displayed. 3. Press and hold the RESET button or select/reset stem for two seconds until MARK THIS AS RESTRICTED is displayed. 4. Wait until KEY RESTRICTED AT NEXT START is displayed. MyKey™ is successfully programmed. Make sure you label it so you can distinguish it from the admin keys. Note: To program the optional settings go to Step 2 in the Programming MyKey™ optional settings section. If your vehicle is equipped with remote start, see the Using MyKey™ with Remote Start Systems section. Note: The MyKey™ can be cleared within the same key cycle that it was created, otherwise a standard key (administrator key) is required to clear the MyKey™ programming. To clear all MyKeys™ go to Step 2 in the Clear MyKey™ section. Programming MyKey™ optional settings Turn the ignition on using an admin key. To program the optional settings, use the message center buttons to do the following: 1. Press SETUP or select/reset stem until RESET FOR MYKEY SETTINGS is displayed. 2. Press and release the RESET button or select/reset stem to display MyKey™ setup menus. The first menu shown is: MYKEY MAX MPH OFF 127