2010 Ford F150 Regular Cab Owner Guide 3rd Printing - Page 128

Locks and Security 3. If you don't want to change the maximum speed setting, press the SETUP button or select/reset stem to display the next menu. The remaining menus appear as follows with the default settings shown: MYKEY MPH TONES 45 55 65 MYKEY VOLUME LIMIT OFF MYKEY ADVTRAC CTRL ON . 4. On any of the menus press RESET or press and hold the select/reset stem to highlight your choice with the . 5. Press SETUP or select/reset stem to enter your choice. The next optional setting will be displayed. 6. Repeat Steps 4 and 5 until you are done changing the optional settings. Clear MyKey™ To reset all MyKeys™ as admin keys do the following: 1. Turn the vehicle on using the admin key. 2. Press SETUP or select/reset stem until PRESS RESET TO CLEAR MYKEY is displayed. 3. Press and release the RESET button or press and hold the select/reset stem until HOLD RESET TO CONFIRM CLEAR is displayed. 4. Press and hold the RESET button or select/reset stem until ALL MYKEYS CLEARED is displayed. Check MyKey™ system status The vehicle system check will provide the status of the following MyKey™ parameters: • MYKEY MILES - This odometer only tracks mileage when a MyKey™ is used. If mileage does not accumulate as expected, then the MyKey™ is not being used by the intended user. The only way to reset this odometer to zero is by clearing MyKey™. If this odometer is lower than the last time you checked, then the MyKey™ system has been recently cleared. • # MYKEY(S) PROGRAMMED - Indicates how many MyKeys™ are programmed to the vehicle. Can be used to detect deletion of a MyKey™. • # ADMIN KEYS PROGRAMMED - Indicates how many admin keys are programmed to the vehicle. Can be used to detect if an additional spare key has been programmed to the vehicle Refer to Message center in the Instrument Cluster chapter for MyKey™ system warnings displays. 128