2010 Ford Flex Owner Guide 2nd Printing - Page 128

Locks and Security Note: For all vehicles with remote start installed, it is possible to program all original vehicle keys as MyKeys™, in which case, you will need to use your remote start system to reset all MyKeys™ as admin keys by doing the following: 1. Enter the vehicle, close all doors. 2. Remote start the vehicle using your remote start fob. 3. Follow Steps 1-4 in the Disable MyKey™ section. Troubleshooting Potential Causes • Key in the ignition is already a MyKey™ • Key in the ignition is the last remaining admin key (there always has to be at least one admin key) • SecuriLock௡ Passive Anti-Theft System is disabled or in unlimited mode • Vehicle has been started using a remote start system that is programmed as MyKey™. Refer to Using MyKey™ with remote start systems section. Cannot program the • Key in the ignition is a MyKey™ MyKey™ optional • No MyKeys™ are programmed to the settings vehicle. Refer to Create a MyKey™ section • Vehicle has been started using a remote start system that is programmed as MyKey™. Refer to Using MyKey™ with remote start systems section. Cannot disable MyKey™ • Key in the ignition is a MyKey™ • No MyKeys™ are programmed to the vehicle. Refer to Create a MyKey™ section • Vehicle has been started using a remote start system that is programmed as MyKey™. Refer to Using MyKey™ with remote start systems section. Lost the only admin key • Purchase a new key from your authorized dealer Lost any key • For programming spare keys, refer to the Programming spare keys section in this chapter. 128 Condition Can't create a MyKey™ 2010 Flex (471) Owners Guide, 2nd Printing USA (fus)