2012 Ford Mustang Boss 302 Supplement 2nd Printing - Page 22

Tire Information WHEELS Your Boss௡ 302 is equipped with unique wheels matched to the tires. These wheels are more susceptible to damage due to their diameter, width and low profile tires. To avoid damage to your wheels: • Maintain proper tire pressure (see Tires in this supplement). • Do not drive your vehicle through an automated, commercial car wash due to the vehicle's low ground clearance, tire width and track width. Wash your vehicle by hand, or by using a touchless commercial wash with no mechanical tracks on the floor. • When installing wheels, always torque lug nuts to specification with a torque wrench. • Inspect your wheels for damage on a regular basis. If a wheel is damaged, replace it immediately. • In the event that you encounter an abnormally harsh impact, inspect the outer edge of your wheels, both inside and out, for damage. Operating at high speeds Your Boss௡ 302 is capable of high speeds and is equipped with tires rated for the vehicle's maximum speed, electronically limited to 155 mph (250 km/h). Remember to drive safely, obey all traffic laws and only operate your vehicle at high speeds at locations equipped and designed to do so safely. Before operating your vehicle at high speeds: • Ensure correct tire pressures (see Tires in this supplement). • Inspect wheels and tires for wear and damage. Replace any damaged wheels or tires. • Do not operate your vehicle at high speeds with more than two passengers or while carrying cargo. Wheel lug nut torque specifications Retighten the lug nuts to the specified torque at 500 miles (800 km) after any wheel disturbance (tire rotation, changing a flat tire, wheel removal, etc.). Wheel lug nut torque* ft-lb N •m 1⁄2 x 20 100 135 * Torque specifications are for nut and bolt threads free of dirt and rust. Use only Ford recommended replacement fasteners. 22 Bolt size 2012 05+ Mustang (197) Supplement, 2nd Printing USA (fus)