2014 Ford Edge Owner Manual Printing 1 - Page 61

60 Keys and Remote Control 3. Remove the old battery. 4. Insert a new battery with the + facing downward. Press the battery down to make sure it is fully in the housing. 5. Snap the battery cover back onto the transmitter and install the backup key. Memory Feature (If Equipped) This feature allows you to recall the driver seat and power mirrors memory positions. Press the unlock button on the remote control or activate intelligent access to recall memory. The seat and power mirrors automatically move to the memory position. The mirrors will move to the programmed position and the seat will move to the easy entry position (if the easy entry feature is enabled). The seat will move to the final position when you switch the keyless ignition on or put the key in the ignition switch. Programming to the Remote Control 1. Switch the ignition on. 2. Move the memory features to the desired positions using the associated controls. 3. Press and hold memory button 1 for about five seconds. A tone will sound after about two seconds. 2 1 Continue to hold until you hear a second tone. 4. Press the lock button on the remote control within three seconds. Repeat this procedure with memory button 2 and a second transmitter if desired. 2014 Edge (edg) Owners Guide gf, 1st Printing, November 2013 USA (fus)