2015 Ford E150 Passenger Owner Manual Printing 1 - Page 255
2015 Ford E150 Passenger Manual
Page 255 highlights
254 Item Capacity Capacities and Specifications Ford part name or Ford part number / equivalent Ford specification A/C refrigerant Motorcraft PAG YN-12-D / compressor oil (With 16 fl oz (473ml) Refrigerant Compressor WSH-M1C231-B 10 prep package) Oil 1 Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure. 2 Add the coolant type originally equipped in your vehicle. 3 Use of synthetic or synthetic blend motor oil is not mandatory. Your engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API Certification Mark for gasoline engines. 4 Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty. 5 Do not use API S category oils labeled as SN, SM, SL or lower category unless the label also display the API certification mark. These oils do not meet the requirements of the engine and emission systems. 6 Automatic transmissions that require MERCON LV should only use MERCON LV fluid. Refer to scheduled maintenance information to determine the correct service interval. Use of any fluid other than the recommended fluid may cause transmission damage. 7 See your authorized dealer for fluid level checking or filling. 8 Fill Dana rear axles to 1/4 inch to 9/16 inch (6 mm to 14 mm) below bottom of fill hole. 9 Optional fuel tank 55.0 gallons (208.0L). 10 See warning below.