2015 Ford E150 Passenger Owner Manual Printing 1 - Page 77

76 TBC MODE (if equipped) LANGUAGE = ENGLISH / SPANISH / FRENCH Information Displays SETUP press and Electric or EOH hold the SELECT/RESET English / Spanish / French stem SYSTEM RESET FOR press and SYSTEM CHECK hold the SELECT/RESET stem CHECK XXX% OIL LIFE ENGINE HOURS (if enabled) ENGINE IDLE HOURS (if enabled) CHARGING SYSTEM BRAKE SYSTEM TBC GAIN = XX.X or NO TRAILER (if equipped) TBC GAIN = XX.X or OUTPUT = ////// (if equipped) XXX MILES TO E • OIL LIFE XXX% HOLD RESET = NEW: This displays the remaining oil life. An oil change is required whenever indicated by the message center and according to the recommended maintenance schedule. USE ONLY RECOMMENDED ENGINE OILS. To reset the oil monitoring system to 100% after each oil change, perform the following: 1. Press and release the SELECT/RESET stem to display OIL LIFE XXX% HOLD RESET = NEW. 2. Press and hold the SELECT/RESET stem for two seconds and release to reset the oil life to 100%. To change oil life 100% value (if equipped): 3. Once "OIL LIFE SET TO XXX%" is displayed, release and press the SELECT/RESET stem to change the oil life start value. Each release and press will reduce the value by 10%.