2010 GMC Canyon Extended Cab Owner's Manual
2010 GMC Canyon Extended Cab Manual
2010 GMC Canyon Extended Cab manual content summary:
- 2010 GMC Canyon Extended Cab | Owner's Manual - Page 1
2010 GMC Canyon Owner Manual In Brief ...1-1 Instrument Panel ...1-2 Initial Drive Information ...1-3 Vehicle Features ...1-15 Performance and Maintenance ...1-17 Seats and Restraint System ...2-1 Front Seats ...2-2 Rear Seats ...2-10 Safety Belts ...2-13 Child Restraints ...2-35 Airbag System ...2- - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 2
Appearance Care ...6-102 Vehicle Identification ...6-110 Electrical System ...6-111 Capacities and Specifications ...6-118 Maintenance Schedule ...7-1 Maintenance Schedule ...7-2 Customer Assistance Information ...8-1 Customer Assistance and Information ...8-2 Reporting Safety Defects ...8-14 Vehicle - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 3
, GMC, the GMC Truck Emblem, and the name CANYON are registered trademarks of General Motors Corporation. This manual describes features that may or may not be on your specific vehicle either because they are options that you did not purchase or due to changes subsequent to the printing of this owner - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 4
property or vehicle damage. This would not be covered by the vehicle's warranty. M : This symbol is shown when you need to see your owner manual for additional instructions or information. * : This symbol is shown when you need to see a service manual for additional instructions or information. iv - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 5
F: M: Fuel Gage Fuses Headlamp High/Low-Beam Changer i: 9: #: !: g: $: Airbag Readiness Light Air Conditioning Antilock Engine Coolant Temperature Exterior Lamps Fog Lamps LATCH System Child Restraints Malfunction Indicator Lamp Oil Pressure Power Remote Vehicle Start Safety Belt Reminders Tire - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 6
✍ NOTES vi - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 7
System ...1-4 Door Locks ...1-4 Tailgate ...1-5 Windows ...1-6 Seat Adjustment ...1-7 Heated Seats ...1-9 Head Performance and Maintenance ...1-17 Traction Control System (TCS) ...1-17 StabiliTrak® ...1-18 Tire Pressure Monitor ...1-18 Engine Oil Life System ...1-19 Driving for Better Fuel Economy - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 8
Instrument Panel Manual Transmission shown, Automatic Transmission similar 1-2 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 9
4-23. O. Glove Box on page 3-40. Initial Drive Information This section provides a brief overview about some of the important features that may or may not be on your specific vehicle. For more detailed information, refer to each of the features which can be found later in this owner manual. 1-3 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 10
Remote Keyless Entry (RKE) System The RKE transmitter is used to lock and unlock the doors from up to 9 meters (30 feet) away from the vehicle. Press UNLOCK to unlock the doors and press LOCK to lock them. Door Locks Manual Door Locks Lock or unlock the door from the outside with the key in the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 11
on the switch on the armrest to lock or unlock the doors. For more information see: • Door Locks on page 3-5 • Power Door Locks on page 3-6 Open the tailgate by pulling up on the outside handle while pulling the tailgate down. On vehicles with a locking tailgate, use the ignition key to unlock it - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 12
Windows Manual Windows Power Windows Use the window crank to open and close each window. Press or pull up on the front of the switch to open or close the window. For more information see: • Manual Windows on page 3-10 • Power Windows on page 3-11 1-6 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 13
Seat Adjustment Manual Seats Power Seats To adjust the seat using the control on the outboard side of it: 1. Lift the bar to unlock the seat. 2. Slide the seat to the desired position and release the bar. • Slide the horizontal control forward or rearward. • Move the front or rear of the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 14
the control forward or rearward. Press and hold the front or rear of the control on the outboard side of the seat until you have the desired lumbar support. For more information see: Manual Seats on page 2-2 Power Seats on page 2-3 Reclining Seatbacks on page 2-5 Power Lumbar on page 2-4 1-8 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 15
installed and adjusted properly. See Head Restraints on page 2-8. With the ignition on, press the top of the switch on the outboard side of the seat to turn the heat on at the high setting. Press the bottom of the switch to turn the heat to the low setting, and put - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 16
by this. If the vehicle has one of the passenger airbag status indicators pictured in the following illustrations, then the vehicle has a passenger sensing system. The Children (LATCH) on page 2-46. United States Canada See Passenger Sensing System on page 2-73 for important information. 1-10 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 17
automatically reduce the glare of lights from behind the vehicle. See Manual Rearview Mirror on page 3-36. 1. Move the selector switch to the L (left) or R (right) to choose the driver or passenger mirror. 2. Press one of the four buttons located on the control pad to move the mirror to the desired - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 18
Interior Lighting Dome Lamps The dome lamps, located in the front and cargo area of the vehicle, come on when any door is opened. Turn the dome lamps on by turning the thumbwheel, located down into a comfortable position. 3. Release the lever to lock the wheel in place. Do not adjust the steering - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 19
O : Turns off all exterior lamps including the Daytime Running Lamps (DRL). AUTO: Automatic operation of the headlamps and other exterior lamps at normal brightness. ; : Manual operation of the parking lamps and other exterior lamps. 2 : Manual operation of the headlamps and other exterior lamps - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 20
of wipes. 8: N: Use for a single wiping cycle. 6: 1: 9: Slow wipes. Fast wipes. Turns the wipers off. D. Air Conditioning A. Temperature E. Air Recirculation Control B. Fan Control C. Air Delivery Mode Control See Climate Control System on page 4-16. Windshield Washer: Push the paddle on top - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 21
can be programmed on the six numbered buttons. See Setting Preset Stations under Radio(s) on page 4-43. Radio with CD (MP3/WMA) PWR: Press to turn the system on and off. Setting the Clock To set the time and date for the radio with CD (MP3/WMA): Press and hold the HR button until the correct - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 22
to update. For detailed instructions on setting the clock for your specific audio system, see Setting the Clock on page 4-43. See "XM Satellite Radio Service" under Radio(s) on page 4-43 and XM Radio Messages on page 4-60. Driver Information Center (DIC) The DIC is located on the instrument panel - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 23
can be used to connect electrical equipment, such as a cellular phone. The vehicle may have an accessory power outlet located below the climate control system and on the rear of the center console. See Accessory Power Outlet(s) on page 4-15. Performance and Maintenance Traction Control System - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 24
warning light on the instrument cluster. The warning light will remain on until the tire pressure is corrected. The proper tire pressures for your vehicle are listed on the Tire and Loading Information label located on the driver side center pillar (B pillar). See Loading the Vehicle on page 5-33 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 25
on vehicle use and displays a DIC message when it is necessary to change the engine oil and filter. Driving for Better Fuel Economy Driving habits can affect fuel mileage. Here are some driving tips to get the best fuel economy possible. Resetting the Oil Life System 1. Turn the ignition to ON - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 26
vehicle to see if you need help. Online Owner Center The Online Owner Center is a complimentary service that includes online service reminders, vehicle maintenance tips, online owner manual, special privileges and more. Sign up today at: www.gmownercenter.com/gmc (U.S.) or www.gm.ca (Canada). 1-20 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 27
, Turn-by-Turn Navigation and Hands-Free Calling are available on most vehicles. Not all OnStar services are available on all vehicles. For more information see the OnStar Owner's Guide or visit www.onstar.com (U.S.) or www.onstar.ca (Canada), contact OnStar at 1-888-4-ONSTAR (1-888-466-7827) or - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 28
satellite signals are unobstructed and available. The vehicle must have a working electrical system, including adequate battery power, for the OnStar equipment to operate. There are other problems OnStar cannot control that may prevent OnStar from providing OnStar service at any particular time or - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 29
82 Front Seats ...2-2 Manual Seats ...2-2 Power Seats ...2-3 Manual Lumbar ...2-3 Power Lumbar ...2-4 Heated Seats ...2-4 Reclining Seatbacks ...2-5 Head Restraints ...2-8 Seatback Latches ...2-9 Rear Seats ...2-10 Rear Seat Operation (Extended Cab) ...2-10 Rear Seat Operation (Crew Cab) ...2-11 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 30
to adjust a manual driver's seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver's seat only when the vehicle is not moving. Try to move the seat with your body to be sure the seat is locked in place - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 31
more information. Manual Lumbar On vehicles with this feature, the knob is located on the outboard side of the driver seat. To adjust the seat: • Move the seat forward or rearward by sliding the horizontal control forward or rearward. • Raise or lower the front part of the seat cushion by moving - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 32
seat(s). Heated Seats If the vehicle has this feature, the controls are located on the outboard side of the front seats. Press and hold the front of the control until you have the desired lumbar support. To decrease lumbar support on for the heated seat feature to work. The seat will heat to the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 33
is located on the outboard side of the seat(s). { WARNING: You can lose control of the vehicle if you try to adjust a manual driver's seat while to be sure they are locked. 1. Lift the recline lever. 2. Move the seatback to the desired position, then release the lever to lock the seatback in place. - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 34
: 1. Lift the lever fully without applying pressure to the seatback and the seatback will return to the upright position. 2. Push and pull on the seatback to make sure it is locked. Power Reclining Seatbacks If the seats have power reclining seatbacks, use the vertical power seat control located on - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 35
reclined like this. The shoulder belt cannot do its job because it will not be against your body. Instead, it will be in front of you. In a crash, you could go into upright. Then sit well back in the seat and wear the safety belt properly. Do not have a seatback reclined if the vehicle is - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 36
may have adjustable head restraints. If the vehicle has rear seats, they may have adjustable head restraints. Pull up on the head restraint to raise it. To lower the head restraint, press the button located on top of the seatback and push down on the head restraint. Adjust the head restraint so - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 37
that fold forward for easy access to the rear seats or the storage area behind the seats. To fold the seatback forward, push the lever on the side of the seat rearward and pull the seatback forward. { WARNING: If either seatback is not locked, it could move forward in a sudden stop or crash - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 38
Rear Seats Rear Seat Operation (Extended Cab) If the vehicle has an extended cab, there may be forward folding seats in the rear area. To store the seat: Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 39
Seat Operation (Crew Cab) The rear seatback(s) in the crew cab can be folded forward. Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat before folding a rear seat. To fold the rear seatback(s) forward: 2. Pull the loop, located on the outboard side of - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 40
To return the seatback(s) to the upright position: 1. Lift the seatback(s) and push it into place. { WARNING: the seatback is not in use, it should be kept in the upright, locked position. { WARNING: If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 41
part of the manual tells you how to use safety belts properly. It also tells you some things you should not do with safety belts. People riding on the tailgate vehicle that is not equipped with seats and safety belts. Be sure everyone in your vehicle is in a seat and using a safety belt properly. - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 42
. After more than 40 years of safety belts in vehicles, the facts are clear. In most crashes buckling up does matter...a lot! Why Safety Belts Work When you ride in or on anything, you go as fast as it goes. Take the simplest vehicle. Suppose it is just - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 43
Put someone on it. Get it up to speed. Then stop the vehicle. The rider does not stop. 2-15 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 44
The person keeps going until stopped by something. In a real vehicle, it could be the windshield... or the instrument panel... 2-16 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 45
more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense. work with safety belts - not instead of them. Whether or not an airbag is provided, all occupants still have to buckle up to get the most - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 46
, and I never drive far from home, why should I wear safety belts? How to Wear Safety Belts Properly This section is only for people of adult size. Be aware that there are special things to know about safety belts and children. And there are different rules for smaller children and infants. If - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 47
cause serious or even fatal injuries. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The shoulder belt locks if there is a sudden stop or crash. Sit up straight and always keep your feet on the floor - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 48
your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit snugly against your body. A: The shoulder belt is too loose. It will not give as much protection this way. 2-20 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 49
Q: What is wrong with this? { WARNING: You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force on your abdomen. This could cause serious or even fatal injuries. The lap belt should be worn low and snug on the hips, just touching the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 50
Q: What is wrong with this? { WARNING: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not on the pelvic bones. This could cause serious internal injuries. Always buckle your belt - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 51
Q: What is wrong with this? { WARNING: You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied on the abdomen, not on the pelvic bones, and that could cause serious or - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 52
Q: What is wrong with this? { WARNING: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 53
wearing the lap-shoulder belt properly. In a crash, you would not be restrained by the shoulder belt. Your body could move too far forward increasing the chance of head and neck injury. You might also slide under the lap over the shoulder and across the chest. A: The belt is behind the body. 2-25 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 54
a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer/retailer to fix it. A: The belt is twisted across the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 55
instructions explain how to wear a lap-shoulder belt properly. 1. Adjust the seat, if the seat is adjustable, so you can sit up straight. To see how, see "Seats child restraint locking feature in the right front seating position may long enough, see Safety Belt Extender on page 2-34. Position the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 56
5. To make the lap part tight, pull up on the shoulder belt. It may be necessary to pull stitching the safety belt is not in use. The latch plate should rest on the stitching on the safety belt, near the guide loop on the side wall. Before a door is closed, be sure the belt is out of the way. If a - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 57
and right front passenger seating position. Adjust the height cannot be seen, they are part of the safety belt assembly. are met. Pretensioners work only once. If the pretensioners activate probably other new parts for the vehicle's safety belt system. See Replacing Restraint System Parts After a Crash - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 58
have outgrown booster seats and for some adults. When installed and properly adjusted, the comfort guide positions the belt away from the neck and head. Here is how to install a comfort guide to the shoulder belt. 1. Slide the guide off of its storage clip located between the interior body and the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 59
2. Place the guide over the belt and insert the two edges of the belt into the slots of the guide. 3. Be sure that the belt is not twisted and it lies flat. The elastic cord must be under the belt and the guide on top. 2-31 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 60
should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. 4. Buckle, guide, squeeze the belt edges together so that the safety belt can be removed from the guide. Slide the guide back on its storage clip located between the interior body - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 61
Use During Pregnancy Safety belts work for everyone, including pregnant Lap-Shoulder Belt on page 2-27. The vehicle may have a center seating position. When you sit in the center front seating position, you have a lap safety belt, which has no retractor. as the lap part of a lap-shoulder belt. 2-33 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 62
use it, and use it only for the seat it is made to fit. The extender has been designed for adults. Never use it for securing child seats. To wear it, attach it to the regular safety belt. For more information, see the instruction sheet that comes with the extender. To make the belt shorter, pull its - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 63
Child Restraints Older Children The manufacturer's instructions that come with the booster seat, state the weight and height limitations for that booster. Use a booster seat with a lap-shoulder belt until the child passes the below fit test: • Sit all the way back on the seat. Do the knees bend at - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 64
internal injuries in a crash. Also see "Rear Safety Belt Comfort Guides" under Lap-Shoulder Belt on page 2-27. According to accident statistics and infants are safer when properly restrained in the rear seating positions than in the front seating positions. In a crash, children who are not buckled - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 65
{ WARNING: Never do this. Never allow a child to wear the safety belt with the shoulder belt behind their back. A child can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, the child would not be restrained by the shoulder belt. The child could move too far forward - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 66
and Young Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 67
{ WARNING: Never do this. Never hold an infant or a child while riding in a vehicle. Due to crash forces, an infant or a child will become so heavy it is not possible to hold it during a crash. For example, in a crash at only 40 km/h (25 mph), a 5.5 kg (12 lb) infant will suddenly become a 110 kg ( - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 68
seat as far back as it will go. Q: What are the different types of add-on child restraints? A: Add-on child restraints, which are purchased by the vehicle's owner, are available in four basic types. Selection of a particular restraint should take into consideration not only the child's weight - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 69
's instructions that come with the restraint state the weight and height limitations for a particular child restraint. In addition, there are many kinds of restraints available for children with special needs. { WARNING: A young child's hip bones are still so small that the vehicle's regular safety - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 70
the infant in place and, in a crash, acts to keep the infant positioned in the restraint. A forward-facing child seat (B) provides restraint for the child's body with the harness. A booster seat (C-D) is a child restraint designed to improve the fit of the vehicle's safety belt system. A booster - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 71
instructions in this manual. To help reduce the chance of injury, the child restraint must be secured in the vehicle. Child restraint systems must be secured in vehicle seats both, and to this manual. The child restraint instructions are important, so if they are not available, obtain a replacement - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 72
airbag. A child in a forward-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates and the passenger seat is in a forward position. The vehicle may have a passenger sensing system which is designed to turn off the right front passenger frontal airbag - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 73
child restraints in the center front seat position. When securing a child restraint in a rear seating position, study the instructions that came with your child restraint to make sure it is compatible with this vehicle. If your vehicle does not have a rear seat that will accommodate a rear-facing - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 74
to secure the restraint, following the instructions that came with that restraint, and also the instructions in this manual. When installing a child restraint with with these attachments in your vehicle. Not all vehicle seating positions or child restraints have lower anchors and attachments or - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 75
. Be sure to read and follow the instructions for your child restraint. If the child restraint does not have a top tether, one can be obtained, in kit form, for many child restraints. Ask the child restraint manufacturer whether or not a kit is available. A top tether (A, C) anchors the top of the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 76
. j (Lower Anchor): Seating positions with two lower anchors. j (Lower Anchor): Seating positions with two lower anchors. Extended Cab - Rear Seat Crew Cab - Rear Seat i (Top Tether Anchor): Seating positions with top tether anchors. Front Seat - Regular and Extended Cab without Rear Seats 2-48 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 77
For crew cab models, there are exposed metal lower anchors for each rear outboard seating position, located where the seatback meets the back of the seat cushion. For extended cab models with rear seats, there are exposed metal lower anchors for each rear seating position, attached to the back wall, - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 78
a crew cab model are located on the back wall behind each rear seating position. Be sure to use an anchor located on the same side of the vehicle as the seating position where the child restraint will be placed. Extended Cab - Rear Seat The top tether anchors in an extended cab model are located on - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 79
the rear rather than the front seat. See Where to Put the Restraint on page 2-44 for additional information. Regular and Extended Cab without Rear Seats For regular and extended cab models without rear seats, there is a top tether anchor located behind a removable cover on the back wall behind the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 80
seriously injured or killed. Install a LATCH-type child restraint properly using the anchors, or use the vehicle's safety belts to secure the restraint, following the instructions that came with the child restraint and the instructions in this manual. 2-52 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 81
belt all the way out of the retractor to set the lock, if your vehicle has one, after the child restraint has instructions and the following steps: 2.1. Pull the seatback forward to access the top tether anchors (A). See Rear Seat Operation (Extended Cab) on page 2-10 or Rear Seat Operation (Crew Cab - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 82
2.2. Route the top tether according to your child restraint instructions and the following instructions: If the position you are using has a fixed latch (B). 2.4. Push rearward on the seatback until it locks into its upright position. Push and pull on the seatback to make sure it is secured properly. - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 83
restraint manufacturer instructions and the instructions in this manual. 3.1. Find the lower anchors for the desired seating position. 3.2. child restraint in different directions to be sure it is secure. Extended Cab - Rear Seat 1. Attach and tighten the lower attachments to the lower anchors. - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 84
the lower anchor attachments and the top tether. The child restraint instructions will show you how. 4. Push and pull the child restraint in different directions to be sure it is secure. Front Seat - Regular/Extended Cab without Rear Seats The vehicle has a right front passenger airbag and may also - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 85
Seatback Latches on page 2-9. 2.2. Pull on the finger access tab to remove the cover to access the top tether anchor. 2.3. Route the top tether according to your child restraint instructions and the following instructions: If the position you are using has a fixed headrest or head restraint and you - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 86
Tethers for Children (LATCH) on page 2-46 for top tether anchor locations. Do not secure a child restraint in a position without a top seat. 2. Pick up the latch plate, and run the lap and shoulder portions of the vehicle's safety belt through or around the restraint. The child restraint instructions - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 87
4. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. 5. If your child restraint has a top tether, attach the top tether to the top tether anchor. See Lower Anchors and Tethers for Children (LATCH) on - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 88
Indicator on page 4-23 for more information on this, including important safety information. A label on the sun visor says, "Never put a rear-facing child seat in the front." This is because the risk to the rear-facing child is so great, if the airbag deploys. Securing a Child Restraint in the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 89
restraint can be seriously injured or killed if the right front passenger airbag inflates and the passenger seat is in a forward position. The vehicle may have a passenger sensing system which is designed to turn and Tethers for Children (LATCH) on page 2-46 for top tether anchor locations. 2-61 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 90
the forward-facing child restraint. 2. Put the child restraint on the seat. 3. Pick up the latch plate, and run the lap and shoulder portions of the vehicle's safety belt through or around the restraint. The child restraint instructions will show you how. 4. Push the latch plate into the buckle - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 91
all the way out of the retractor to set the lock. 6. If the vehicle does not have a rear seat and the child restraint manufacturer recommends using a top tether anchor, attach the top tether to the top tether anchor. Refer to the instructions that came with the child restraint and to Lower Anchors - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 92
deployment opening. For frontal airbags, the word AIRBAG will appear on the middle part of the steering wheel for the driver and on the instrument panel for the -rail airbag for the driver and the passenger seated directly behind the driver. • A roof-rail airbag for the right front passenger - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 93
Occupants should not lean on or sleep against the door or side windows in seating positions with roof-rail airbags. { WARNING: You can be severely injured or your safety belt - even if you have airbags. Airbags are designed to work with safety belts, but do not replace them. Also, airbags are not - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 94
on page 2-38. There is an airbag readiness light on the instrument panel, which shows the airbag symbol. The system checks the airbag electrical system for malfunctions. The light tells you if there is an electrical problem. See Airbag Readiness Light on page 4-22 for more information. 2-66 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 95
Where Are the Airbags? The right front passenger's airbag is in the instrument panel on the passenger's side. The driver's airbag is in the middle of the steering wheel. 2-67 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 96
between an occupant and an airbag, and do not attach or put anything on the steering wheel hub or on or near any other airbag covering. Never secure anything to the roof of a vehicle with roof-rail airbags by routing a rope or tie down through any door or window opening. If - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 97
When Should an Airbag Inflate? Frontal airbags are designed to inflate in moderate to severe frontal or near-frontal crashes to help reduce the potential for severe injuries mainly to the driver's or right front passenger's head and chest. However, they are only designed to inflate if the impact - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 98
which enables the sensing system to monitor the position of the driver's seat and the right front passenger's seat. Seat position sensors provide information that is used to determine if the airbags For roof-rail airbags, deployment is determined by the location and severity of the side impact. 2-70 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 99
electrical signal triggering a release of gas from the inflator. Gas from the inflator fills the airbag causing the bag to break out of the cover and deploy. The inflator, the airbag, and related hardware are all part of the airbag module. Frontal airbag modules are located 's upper body, stopping - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 100
If you experience breathing problems following an airbag deployment, you should seek medical attention. Your vehicle has a feature that may automatically unlock the doors (if equipped with power door locks), turn the interior lamps on, flash the hazard warning flashers, and turn off the radio when the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 101
service manual for your vehicle covers the need to replace other parts. • Your vehicle has a crash sensing and diagnostic module which records information after a crash. See Vehicle Data Recording and Privacy on page 8-16 and Event Data Recorders on page 8-17. • Let only qualified technicians work - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 102
system works with sensors that are part of the right front passenger seat. The sensors are designed to detect the presence of a properly-seated occupant not be transported in the vehicle, even if the airbag is off. United States Canada The words ON and OFF, or the symbol for on and off, will be - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 103
airbag. A child in a forward-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates and the passenger seat is in a forward position. Even if the passenger sensing system has turned off the right front passenger frontal airbag, no system is fail-safe - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 104
weight off of the seat for a period of time. • The right front passenger seat is occupied by a smaller person, such as a child who has outgrown child restraints. • Or, if there is a critical problem size is sitting properly in the right front passenger seat person's seating posture and body build. - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 105
Remove any additional items from the seat such as blankets, cushions, seat covers, seat heaters, or seat massagers. 4. Reinstall the child in the child restraint in a rear seat position in the vehicle and check with your dealer/retailer. If no rear seat is available, do not install a child restraint - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 106
any additional material from the seat, such as blankets, cushions, seat covers, seat heaters, or seat massagers. 3. Place the seatback in the fully upright position. 4. Have the person sit upright in the seat, centered on the seat cushion, with legs comfortably extended. 5. Restart the vehicle and - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 107
turn the airbag off for some adult size occupants. If this happens, let the belt go back all the way and start again. A thick layer of additional material, such as a blanket or cushion, or aftermarket equipment such as seat covers, seat heaters, and seat massagers can affect how well the passenger - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 108
in this manual. See Customer Satisfaction Procedure on page 8-2. A: Yes. If you add things that change the vehicle's frame, bumper system, height, front end or side sheet metal, they may keep the airbag system from working properly. Changing or moving any parts of the front seats, safety belts - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 109
not work properly. Do not open or break the airbag coverings. If there are any opened or broken airbag covers, have the airbag covering and/or airbag module replaced. For the location of the airbag modules, see What Makes an Airbag Inflate? on page 2-71. See your dealer/retailer for service. 2-81 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 110
an airbag inflates, you will need to replace airbag system parts. See the part on the airbag system earlier in this section. Have the safety even death in a crash. To help make sure your restraint systems are working properly after a crash, have them inspected and any necessary replacements made as - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 111
25 Parking Brake ...3-30 Shifting Into Park (Automatic Transmission) ...3-31 Shifting Out of Park (Automatic Transmission) ...3-32 Parking the Vehicle (Manual Transmission) ...3-33 Parking Over Things That Burn ...3-33 Engine Exhaust ...3-34 Running the Vehicle While Parked ...3-34 Mirrors ...3-36 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 112
the path of a closing window. Do not leave the keys in a vehicle with children. The key can be used for the ignition, all door locks, and the tailgate. The key has a bar-coded key tag that the dealer/retailer or qualified locksmith can use to make new keys. Store this information - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 113
(RKE) System See Radio Frequency Statement on page 8-18 for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/211 of Industry and Science Canada. Changes or modifications to this system by other than an authorized service facility could void authorization - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 114
the doors lock but the the circuitry on the transmitter. Static from your body could damage the transmitter. To replace the transmitters programmed to the vehicle will work. If a transmitter is lost , thin object inserted in the slot between the covers of the transmitter housing. 2. Remove the old - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 115
Always lock the vehicle whenever leaving it. or stop your vehicle. Locking your doors can help prevent of a moving vehicle. When a door is locked, the handle will not open it. The LOCK or UNLOCK button on the Remote Keyless Entry (RKE) transmitter. To lock a door from the inside, move the manual - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 116
from the ignition. To change the automatic door lock and unlock settings, see "Automatic Door Locks" under DIC Operation and Displays on page 4-33. Driver Switch shown Press L to lock all the doors at once. To unlock all the doors, press U. On crew cab models, use the manual door lock lever on each - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 117
Door Security Locks (Crew Cab) If the vehicle is a crew cab model, it may have rear door security locks. With this feature, the rear doors are locked so they cannot be opened from the inside. The rear door security lock is located on the inside edge of each rear door below the security lock label - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 118
. Be sure everyone in your vehicle is in a seat and using a safety belt properly. Open the tailgate by pulling up on the outside handle while pulling the tailgate down. When the tailgate is shut, be sure it is latched securely. On vehicles with a locking tailgate, use the ignition key. Turn the key - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 119
while pushing the cable bracket forward. When the larger part of the hole on the bracket is over the bolt, slide the bracket off of the bolt. To partially lower the tailgate: 1. With the tailgate fully open, lift up slightly on the entire tailgate assembly. 2. Remove the retaining cable from the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 120
even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather. Manual Windows On a vehicle with manual windows, use the handle on each door to open and close each window. 3-10 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 121
switches for all windows are located on the driver door armrest. Each passenger door has its own switch. Crew Cab Switches shown The power windows will work when the ignition is in ACC/ACCESSORY or ON/RUN or while Retained Accessory Power (RAP) is active. See Retained Accessory Power (RAP) on page - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 122
at any time by pulling up on the switch. Sliding Rear Window Window Lockout o (Window Lockout): On crew cab vehicles with power windows, there is also a window lockout button located forward of the window switches. This feature disables the passenger window switches when the window lockout button - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 123
, the theft-deterrent system will not activate if you lock the doors with a key, the manual door lock, or power door lock switch. The system can only be activated using the RKE transmitter, or by OnStar®. See the OnStar Owner's Guide for additional information. You should also remember that you - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 124
the manual door lock and open the door. This should set off the alarm. 3. To turn the alarm off, press the unlock button on the RKE transmitter or start the engine. If the alarm does not sound when it should but the lights flash, check to see if the horn works. The horn fuse may - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 125
See Radio Frequency Statement on page 8-18 for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/211 of Industry and Science Canada. When trying to start the vehicle, if the engine does not start and the security light comes on, there may be a problem - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 126
engine does not start see your dealer/retailer for service. 5. After the engine has started, turn the key to LOCK/OFF, and remove the key. Insert the key to be programmed and turn it to ON/RUN an elaborate break-in. But it will perform better in the long run if you follow these guidelines: • Keep - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 127
manual transmission vehicles. The key can on be removed in LOCK/OFF. (C) ON/RUN: This position can be used to operate the electrical accessories and to display some instrument panel cluster warning and indicator lights. The switch stays in this position when the engine is running. The transmission - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 128
after the engine is turned off: • Audio System • Wipers • Power Windows These features work when the key is in ON/RUN or ACC/ACCESSORY. Once the key is turned from ON/RUN to LOCK/OFF, power to these features continue to work for up to 20 minutes or until a door is opened. Manual Transmission The - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 129
to work with the electronics in the vehicle. If you add electrical parts or accessories, you could change the way the engine operates. Before adding electrical equipment, check with your dealer/retailer. If you do not, the engine might not perform properly. Any resulting damage would not be covered - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 130
be parking the vehicle for the best advice on this. To Use the Engine Coolant Heater 1. Turn off the engine. 2. Open the hood and unwrap the electrical cord. The cord is located in the engine compartment behind the underhood fuse block on the driver side of the vehicle. 3. Plug it into a normal - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 131
, see Towing a Trailer on page 5-48. Make sure the shift lever is fully in P (Park) before starting the engine. The vehicle has an automatic transmission shift lock control system. You must fully apply the brake pedal before you can shift from P (Park) when the ignition key is in ON/RUN. If you - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 132
at high speed may damage the transmission. The repairs would not be covered by the vehicle warranty. Be sure the engine is not running at high speed when shifting the vehicle. D (Drive): This position is for normal driving. It provides the best fuel economy. If you need more power for passing - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 133
(Drive) when driving on hilly, winding roads, or when towing a trailer, so there is less shifting transmission. The repair will not be covered by the vehicle warranty. If you are stuck, do not spin the tires. When stopping on a hill, use the brakes to hold the vehicle in place. Manual Transmission - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 134
fuel economy, accelerate slowly and shift when the light comes on. While you accelerate, it is normal for the light to go on and off if you quickly change the position of the accelerator. Ignore the shift light when you downshift. If the vehicle has four-wheel drive and has a manual transmission - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 135
would not be covered by your warranty. Never use four-wheel drive when the compact spare tire is installed on the vehicle. Four-Wheel Drive If the vehicle has four-wheel drive, you can send the engine's driving power to all four wheels for extra traction. To get the best performance out of four - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 136
Case Settings Driving Conditions Normal Severe Extreme Vehicle in Tow* Transfer Case Settings 2 { WARNING: Shifting the transfer case to Neutral can cause the vehicle to roll even if the transmission is in P (Park), or if you have a manual transmission, even if you are in gear. You or someone - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 137
you were driving off-road in sand, mud, take the vehicle in for service. An indicator light will the front axle will lock automatically. Shifting from Four transmission momentarily into R (Reverse) and D (Drive), for an automatic transmission, or R (Reverse) and 1 (First) for a manual transmission - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 138
Towing on page 5-41 for towing instructions. To shift the transfer case into N (Neutral) do the following: 1. Set the parking brake. 2. Start the vehicle. 3. Press the regular brake pedal and shift the transmission in N (Neutral), or press in the clutch for vehicles with a manual transmission - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 139
starting at Step 3. 7. Turn the engine off by turning the key to ACC/ACCESSORY. 8. Place the transmission shift lever in P (Park), or 1 (First) for vehicles that have a manual transmission. 9. Turn the ignition to LOCK/OFF. Shifting Out of Neutral After towing the vehicle, you will have to shift - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 140
. A chime will activate and the brake warning light, located on the instrument panel, will flash when the parking parking brake, hold the regular brake pedal down. Pull the bottom edge of the lever, located above the parking brake damage to brake system parts. Make sure that the parking brake is fully - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 141
Transmission as it will go. 3. Turn the ignition key to LOCK/OFF. 4. Remove the key and take it with you. The vehicle can roll. If you have left the engine running, the vehicle can move suddenly. You or others that follow. If you are pulling a trailer, see Towing a Trailer on page 5-48. 1. Hold the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 142
the Vehicle With the Engine Running (Automatic Transmission) Torque Lock (Automatic Transmission) If you are parking on a hill and you do not shift the transmission into P (Park) properly, the weight of the vehicle may put too much force on the parking pawl in the transmission. You may find it - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 143
) 3. Move the shift lever to the desired position. If you are still having a problem shifting, then have the vehicle serviced. Parking Over Things That Burn { WARNING: Things that can burn could touch hot exhaust parts under the vehicle and ignite. Do not park over papers, leaves, dry grass, or - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 144
that has no fresh air ventilation. Running the Vehicle While Parked It is better not to park with the engine running. But if you ever have to, here are some things to know. { WARNING: Idling a vehicle in an enclosed area with poor ventilation is dangerous. Engine exhaust may enter the vehicle - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 145
Transmission) on page 3-31. If pulling a trailer, see Towing a Trailer on page 5-48. Monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. Never run the engine in an enclosed area that has no fresh air ventilation. For more information, see Engine Exhaust - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 146
Mirrors Manual Rearview Mirror Hold the inside rearview mirror in the center to move it buttons located at the bottom of the mirror. See your dealer/retailer for more information on the system and how to subscribe to OnStar. See the OnStar ® owners guide for more information about the services OnStar - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 147
(F or C) flashes. 2. Press Y b / O again and release to change the unit of measure. Wait several seconds and the compass/temperature display returns with the update to be delayed. If an incorrect temperature displays for an extended period, see your dealer/retailer. Compass Compass Operation Press Y - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 148
you do not live in zone eight or drive out of the area, the compass variance needs to be changed to the appropriate zone. To adjust for compass variance: 1. Find the current location and variance zone number on the following zone map. 3. Press Y b / O repeatedly until the new zone number displays - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 149
or passenger mirror. 2. Press one of the four buttons located on the control pad to move the mirror to the reverse the mirror direction using the control pad. Manually fold the mirrors inward to prevent damage when over your shoulder before changing lanes. The passenger side mirror is convex shaped. - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 150
part of the front doors as well as two cupholders located at the front end of the console. Vehicles with bench seats may have cupholders attached to the front of the center seat. For vehicles that are an extended cab or crew cab model, the vehicle also has two rear cupholders. On crew cab models - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 151
Rear Storage Area Extended cab models might have storage compartments under the rear seats. To access the storage compartments, lift the cushion on the bottom of the rear seats. This exposes the storage boxes under the seat. To open a storage box, unhook the bottom and lift the two latches on each - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 152
Sunroof The vehicle may have a sunroof. The sunroof control buttons are located on the headliner. Lift the lid from the center area to access the storage box. Q (Open/Vent): Press and hold this button to vent, and open the sunroof. Release the button when the desired position is reached. R (Close - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 153
Engine Coolant Temperature Gage ...4-27 Tire Fuel Gage ...4-32 Instrument Panel Overview ...4-3 Hazard Warning Flashers ...4-3 Horn ...4-3 Tilt Wheel ...4-3 Turn Signal/Multifunction Lever ...4-4 Turn and Lane-Change Electric Power Management ...4-14 Battery Run-Down Protection ...4-15 Accessory - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 154
Messages ...4-60 Theft-Deterrent Feature ...4-61 Radio Reception ...4-61 Fixed Mast Antenna ...4-63 XM™ Satellite Radio Antenna System ...4-63 Chime Level Adjustment ...4-63 Driver Information Center (DIC) ...4-33 DIC Operation and Displays ...4-33 DIC Warnings and Messages ...4-37 Audio System - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 155
located on the instrument panel, to make the front and rear turn signal lamps flash on and off. This warns others that you are having trouble. Press Tilt Wheel | again to turn the flashers off. The turn signals do not work to lock the wheel in place. Do not adjust the steering wheel while driving. - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 156
, Stoplamps and Back-up Lamps on page 6-53. For a blown fuse or circuit breaker, see Fuses and Circuit Breakers on page 6-111. The lever on the left side of the steering column includes the following: G: Turn and Lane Change Signals Headlamp High/Low-Beam Changer 53: N: L: J: Windshield Wipers - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 157
Wipers The windshield wiper controls are located on the multifunction lever. They are controlled by turning the band with this z symbol. The windshield wipers work in all ignition positions, except off. This includes the Retained Access Power mode. See Retained Accessory Power (RAP) on page 3-18 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 158
Move the band to one of the following positions: Windshield Washer 8 (Mist): Single wipe, move the band to z and then release it. Several wipes, hold the band on z longer. For a delayed wiping cycle. Turn the band up for more frequent wipes or down for less frequent wipes. { WARNING: In freezing - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 159
you cannot drive safely at a steady speed. So, do not use the cruise control on winding roads or in heavy traffic. Cruise control can be dangerous on slippery roads. On such roads, fast changes in tire traction can cause excessive wheel slip, and you could lose control. Do not use cruise control on - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 160
Setting Cruise Control { WARNING: If you leave your cruise control on when you are not using cruise, you might hit a button and go into cruise when you do not want to. You could be startled and even lose control. Keep the cruise control switch off until you want to use cruise control. 1. Move the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 161
turn off. Using Cruise Control on Hills How well the cruise control works on hills depends upon the vehicle speed, load, and the steepness of 9 . • Lightly tap or press the clutch, if you have a manual transmission. Erasing Speed Memory The cruise control set speed memory is erased when the cruise - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 162
Lamps): The exterior lamp control is located on the instrument panel on the left side of the steering wheel. Turn the knob, located to the right of this symbol, Lights O (Off): Turns off all exterior lamps including the Daytime Running Lamps (DRL). 2 (Headlamps): Turns on the headlamps, together - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 163
the ignition is in LOCK/OFF. For vehicles first sold in Canada, if the parking lamps are turned on manually, the Daytime Running Lamps (DRL) will stay DRL to the regular headlamps. The regular headlamp system should be turned on when needed. Daytime Running Lamps (DRL) Daytime Running Lamps (DRL) - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 164
radio lights will become dimmer when the headlights are off compared to when the headlights are on. The vehicle has a light sensor located on the top of the instrument panel. Do not cover of the Daytime Running Lamps (DRL) headlamp system to change to DRL if it the fog lamps to work. The fog lamps - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 165
or in the top-box storage units. This button is located on the driver side of radio display do not dim to complete darkness. The instrument panel light brightness control will only work if the headlamps or parking lamps are on. See Exterior Lamps on page 4-10. Dome Lamp The dome lamps, located - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 166
at high speed, heated seats, engine cooling fans, trailer loads, and loads plugged into accessory power outlets. EPM works to prevent excessive discharge of the battery. It does this by balancing the generator's output and the vehicle's electrical needs. It can increase engine idle speed to generate - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 167
vehicle or adapter fuses. If you experience a problem, see your dealer/retailer for additional information on accessory power outlets. Notice: Adding any electrical equipment to the vehicle can damage it or keep other components from working as they should. The repairs would not be covered by the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 168
ashtray and cigarette lighter. The ashtray is located in the center console area. The ashtray can occur to the lighter or heating element, or a fuse could be blown. Do not hold a cigarette lighter in while B. Fan Control C. Air Delivery Mode Control D. Air Conditioning E. Recirculation Temperature - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 169
must be on to use the air conditioning. There might be a slight change in engine performance when the air conditioning compressor shuts off and turns on again. This is normal. The system is designed to make adjustments to help with fuel economy while still maintaining the selected temperature - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 170
could be a problem, check the section that explains what to do. Follow this manual's advice. Waiting to do repairs can be costly and even dangerous. Outlet Adjustment Use the thumbwheel on the outlets to change the direction of the air flow. Lift up or push down on the thumbwheel located in the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 171
is designed to show how the vehicle is running. It shows how fast the vehicle is going, about how much fuel has been used, and many other things needed to drive safely and economically. United States automatic transmission 2.9L version shown, Canada, manual transmission, 3.7L and 5.3L similar 4-19 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 172
kilometers (used in Canada). The odometer mileage can be checked without the vehicle running by pressing the automatically detect and update the vehicle's accumulated mileage. Trip Odometer The vehicle has a trip displays the engine speed in revolutions per minute (rpm). Notice: If the engine is - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 173
belt reminder light, several seconds after the engine is started, a chime sounds for their safety belt. The passenger safety belt light, located on the instrument panel, comes on and stays on chime may turn on if an object is put on the seat such as a briefcase, handbag, grocery bag, laptop or - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 174
stays on it indicates there is an electrical problem. The system check includes the airbag sensor working properly. The airbags in the vehicle might not inflate in a crash, or they could even inflate without a crash. To help avoid injury, have the vehicle serviced right away. If there is a problem - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 175
airbag status indicators pictured in the be a problem with the lights or the passenger sensing system. See your dealer/retailer for service. { WARNING serviced right away. See Airbag Readiness Light on page 4-22 for more information, including important safety information. United States Canada - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 176
is an electrical problem. Have it checked right away. If the vehicle must be driven a short distance with the light on, turn off accessories, such as the radio and air conditioner. When this light comes on, shift to the next higher gear if weather, road, and traffic conditions allow. See Manual - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 177
the vehicle towed for service. See Towing Your Vehicle on page 5-41. { WARNING: United States Canada This light comes on briefly when the ignition key is turned to ON/RUN. If it does not, have it fixed so it will be ready to warn if there is a problem. The brake system might not be working properly - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 178
and there is a problem with the regular brakes. See Brake System Warning Light on page 4-25. See DIC Warnings and Messages on page 4-37 for all brake related DIC messages. 4-26 If it does not, have the vehicle serviced by your dealer/retailer. If the system is working normally the indicator light - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 179
the top of the gage, the engine is too hot. It means that the engine coolant has overheated. If the vehicle has been operating under normal driving conditions, pull the vehicle off the road, stop the vehicle and turn off the engine as soon as possible. See Engine Overheating on page 6-35 for more - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 180
, helping to produce a cleaner environment. This light should come on when the ignition is on, but the engine is not running, as a check to show it is working. If it does not, have the vehicle serviced by your dealer/retailer. When the Light is On Steady This indicates that one or more of the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 181
controls might not work as well, the vehicle's fuel economy might not be as good, and the engine might not run as smoothly. This could lead to costly repairs that might not be covered by the vehicle warranty. Notice: Modifications made to the engine, transmission, exhaust, intake, or fuel system of - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 182
service might be required. An emission system malfunction might be corrected by doing the following: • Make sure to fuel the vehicle with quality fuel. Poor fuel quality causes the engine not to run any mechanical or electrical problems that might have developed. • Make sure the fuel cap is fully - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 183
would not be covered by the vehicle warranty. Always follow the maintenance schedule in this manual for changing engine oil. This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer/ retailer. If the system is working normally the indicator - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 184
is not flowing through the engine properly. The vehicle could be low on oil and it might have some other system problem. Highbeam On Light This light is set. When the ignition is on, the fuel gage shows how much fuel the vehicle has remaining in the fuel tank. The light goes out when the cruise - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 185
problem with the vehicle's fuel gage: Driver Information Center (DIC) The Driver Information Center (DIC) displays information such as the trip odometer, personalization features, and warning messages. The DIC display is located on the instrument panel cluster. • At the gas station, the gas service - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 186
odometer in either miles for the United States or kilometers for Canada. To reset the trip odometer, press and hold the reset stem until the display returns to zero. Engine Oil Life System With the engine off, turn the key to ON/RUN and then press the reset stem until OIL LIFE RESET appears - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 187
clears. The following are the available modes: Lock 1 (default): On vehicles with an automatic transmission, this mode locks all of the doors when the vehicle is shifted into P (Park). On vehicles with a manual transmission, this mode locks all of the doors when the vehicle speed is greater than 15 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 188
: 1. With the engine off, turn the key to LOCK/OFF. Do not remove the key from the ignition. 2. Press and hold the lock and unlock buttons on clears. The following are the available modes: RFA 1 (default): This mode flashes the parking lamps when you press the lock or unlock buttons on the RKE - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 189
driver that the status of the vehicle has changed and that some action may be needed by problem. The following are the possible messages that can be displayed and some information about them. AC (Air Conditioning) OFF This message displays when the engine coolant temperature is too high and the air - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 190
Gage on page 4-27. Have your vehicle serviced by your dealer/retailer as soon as possible if you suspect the engine is overheating. See Engine Overheating on page 6-35 for more information. CHANGE OIL This message displays when the oil needs to be changed. Check the oil in your vehicle as soon - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 191
page 6-57 and Inflation - Tire Pressure on page 6-64 for more information on tires and the correct inflation pressures. OIL This message displays when the oil pressure is low. See Oil Pressure Light on page 4-31 and Engine Oil on page 6-15 for more information. LOW FUEL This message displays if the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 192
reset stem to acknowledge the message and clear it from the display. SERV (Service) TPM (Tire Pressure Monitor) This message displays if a part on the Tire Pressure Monitor System (TPMS) is not working properly. The tire pressure light also flashes and then remains on during the same ignition cycle - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 193
will lose the ability to enter the fuel economy mode. The vehicle is safe to drive, however have the electrical system checked by your dealer/retailer. Press This message will display if there is a problem with the TCS. Have your vehicle serviced by your dealer/retailer. See Traction Control System - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 194
the vehicle's engine, radio, or other systems, and could damage them. Follow federal rules covering mobile radio and telephone is turned off. See Retained Accessory Power (RAP) on page 3-18 for more information. { WARNING: Taking your eyes off the road for extended periods could cause a crash - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 195
display the time with the ignition off, press RCL, HR, or MIN. Radio(s) Radio with CD (MP3/WMA) Press and hold the HR button until the buttons, at the same time, for another two seconds. If the time is not available from the station, NO UPDAT (update) displays. RDS time is broadcast once a minute - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 196
from these stations and only works when the information is available. In rare cases, a radio station could broadcast incorrect information that causes the radio features to work improperly. If this happens, contact the radio station. Radio with CD (MP3/WMA) While the radio is tuned to an RDS - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 197
DISPL (Display) (Radio with CD): When the ignition is turned off, press to display the time. For RDS, press the DISPL knob to change what displays while using RDS. The display options are station name, RDS station frequency, PTY (program type), and the name of the program (if available). For XM™ (if - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 198
either arrow again to stop scanning. To scan preset stations, press and hold either arrow for more than four seconds until two beeps sound. The radio goes to the first preset station stored on the pushbuttons, plays for a few seconds, then goes to the next preset station. Press either arrow again - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 199
) can be programmed on the six numbered pushbuttons. To program either radio: 1. Turn the radio on. 2. Press BAND to select FM1, FM2, AM, or station. 4. Press and hold one of the six numbered pushbuttons until the radio beeps once. When that numbered pushbutton is pressed again, the station that was - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 200
out of audio mode by pressing another button, causing the radio to perform that function or wait five seconds for the display to manual mode, press the AUTO EQ button until CUSTOM displays. Then manually adjust the bass/treble, or bass/midrange/treble by using the AUDIO knob. • For the AM-FM Radio - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 201
. To do this, press any button for the radio to perform that function or wait five seconds for the display to return to time of day. Then press and hold AUDIO for more than two seconds until a beep sounds. CEN (center) displays. Fade might not be available if the vehicle is a regular cab model. 4-49 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 202
, press and hold BAND for two seconds. AF ON displays. The radio could switch to stations with a stronger frequency. To turn alternate frequency radio does not switch to other stations. This function does not apply for XM Satellite Radio Service. Setting Preset PTYs (RDS) Only For the Radio with - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 203
the current radio station, not supported by all is not displayed, parts of the message displays radio is tuned to a different station. When a message is not available from a station, NO INFO displays. TRAF (Traffic): For the Radio radio plays the traffic announcement if the volume is low. The radio - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 204
. The CD player can play the smaller 3 inch (8 cm) single CDs with an adapter ring. Full-size CDs and the smaller CDs are loaded in the same manner. XM™ Satellite Radio Service XM is a satellite radio service that is based in the 48 contiguous United States and 10 Canadian provinces. XM Satellite - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 205
Care of Your CDs If playing a CD-R, the sound quality can be reduced due to CD-R quality, the method of recording, the quality of the music that has been recorded, and the way the CD-R has been handled. Handle them carefully. Store CD-R(s) in their original cases or other protective cases and away - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 206
playing. ET and the elapsed time of the track displays. To change the default on the display (track or elapsed time), press until you the radio when a CD is playing. The inactive CD remains inside the radio for future listening. CD AUX (Auxiliary): Press to play a CD when listening to the radio. - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 207
. If the radio displays an error message, write it down and provide it to your dealer/retailer when reporting the problem. CD Messages CHECK on a very rough road. When the road becomes smoother, the CD should play. • The CD is dirty, scratched, wet, or upside down. • The air is very humid. If - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 208
the length of the file, folder, or playlist names. An MP3/WMA CD-R that was recorded using no file folders. The system can support up to 11 folders in depth, though, keep the depth of the folders to a minimum in order to keep down the complexity and confusion in trying to locate a particular - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 209
the folder the radio displays ROOT. When the CD contains only playlists and compressed audio files, but no folders, all files are located under the root track name. Track names longer than 32 characters or four pages are shortened. Parts of words on the last page of text and the extension of the fi - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 210
with the ignition off, first press the Z button or the DISPL knob. If the ignition or radio is turned off with a CD in the player it stays in the player. When the ignition or radio is turned on, the CD starts to play where it stopped, if it was the last selected - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 211
RDM (disc random) displays. This feature does not work with playlists. When in random, pressing and releasing either day and the ID3 tag song name. To change the default on the display, press the DISPL and hold this knob for two seconds. The radio produces one beep and the selected display is now - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 212
is available at this time on this channel. The system is working properly. XM Lock: The XM receiver in your vehicle could have previously been in another vehicle. For security purposes, XM receivers cannot be swapped between vehicles. If this message is received after having your vehicle serviced - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 213
is designed to discourage theft of your vehicle's radio. The feature works automatically by learning a portion of the Vehicle Identification Number (VIN). If the radio is moved to a different vehicle, it does not operate and LOCKED displays. When the radio and vehicle are turned off, the blinking red - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 214
or tunnels may cause loss of the XM signal for a period of time. FM Stereo FM signals only reach about 10 to 40 miles (16 to 65 km). Although the radio has a built-in electronic circuit that automatically works to reduce interference, some static can occur, especially around tall buildings or hills - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 215
the antenna is tightened to its base. If tightening is required, tighten by hand until fully seated plus one quarter turn. Chime Level Adjustment The radio is used to adjust the vehicle's chime level. To change the volume level of the chime, press and hold pushbutton 6 with the ignition on and the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 216
✍ NOTES 4-64 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 217
the Vehicle ...5-33 Truck-Camper Loading Information ...5-40 Pickup Conversion to Chassis Cab ...5-40 Towing ...5-41 Towing Your Vehicle ...5-41 Recreational Vehicle Towing ...5-41 Towing a Trailer ...5-48 Trailer Recommendations ...5-60 Your Driving, the Road, and the Vehicle ...5-2 Defensive - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 218
and drive or ride with a driver who has been drinking. Ride home in a cab; or if you are with a group, designate a driver who will not drink. Death muscular coordination, vision, and attentiveness. { WARNING: Assume that other road users (pedestrians, bicyclists, and other drivers) are going to be - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 219
these laws. The obvious way to eliminate the leading highway safety problem is for people never to drink alcohol and then drive. tires and road can provide. Meaning, you can lose control of the vehicle. Adding non-dealer/non-retailer accessories can affect vehicle performance. See Accessories - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 220
eyesight all play a part. So do alcohol, road, whether it is pavement or gravel; the condition of the road, whether it is wet, dry, or icy; tire tread; the condition of the brakes; the weight the engine accessories can affect vehicle performance. See Accessories and Modifications on page 6-3. 5-4 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 221
prevent a braking skid. When the engine is started and the vehicle begins problem with the ABS, this warning light stays on. See Antilock Brake System (ABS) Warning Light on page 4-26. ABS can change work. The brakes might vibrate or some noise might be heard, but this is normal. Let us say the road - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 222
performs several diagnostic checks to insure there are no problems. The system may be heard or felt while it is working. This is normal and does not mean there is a problem when road conditions allow. See Cruise Control on page 4-7. If there is a problem detected with StabiliTrak, a SERVICE STAB - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 223
control portion of traction control will work. The engine speed management will be disabled. In this mode, engine power is not reduced automatically and or StabiliTrak is both on and activated. The StabiliTrak/TCS button is located on the instrument panel. To turn off TCS, press and release the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 224
The repairs would not be covered by the vehicle warranty. Reduce engine power and do not spin the wheel(s) excessively while these lights and messages are displayed. TCS can operate on dry roads under some conditions. When this happens, the system may be heard working or a reduction in acceleration - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 225
. Adding non-dealer/non-retailer accessories can affect the vehicle's performance. See Accessories and Modifications on page 6-3. Steering Tips It is important to take curves at a reasonable speed. Traction in a curve depends on the condition of the tires and the road surface, the angle at which - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 226
. The vehicle can perform very well in emergencies like these. First apply the brakes. See Braking on page 5-3. It is better to remove as much speed as possible from a collision. Then steer around the problem, to the left or right depending on the space available. An emergency like this requires - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 227
road onto the shoulder while driving. Passing Passing another vehicle on a two-lane road can be dangerous. To reduce the risk of danger while passing: • Look down the road turn) until the right front tire contacts the pavement edge. Then turn the steering wheel to go straight down the roadway. - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 228
review what driving experts say about what happens when the three control systems - brakes, steering, and acceleration - do not have enough friction where the tires meet the road speed by shifting to a lower gear. Any sudden changes could cause the tires to slide. You may not realize the surface is - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 229
You Go Off-Roading • Have all necessary maintenance and service work done. • Make sure there is enough fuel, that fluid levels are where they should be, and that the spare tire is fully inflated. • Be sure to read all the information about four-wheel-drive vehicles in this manual. • Make sure all - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 230
Loading Your Vehicle for Off-Road Driving WARNING: (Continued) • Heavy loads on the roof raise the vehicle's { WARNING: • Cargo on the load floor piled things are not tossed around. You will find other important information under Loading the Vehicle on page 5-33 and Tires on page 6-57. 5-14 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 231
instructions. roading requires some new and different skills. Tune your senses to different kinds of signals. Your eyes need to constantly sweep the terrain for unexpected obstacles. Your ears need to listen for unusual tire or engine sounds. Use your arms, hands, feet, and body exhaust system. 5-15 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 232
more bounce when driving over obstacles. • More braking distance is needed, especially on an unpaved surface. { WARNING: When you are driving off-road, bouncing and quick changes in direction can easily throw you out of position. This could cause you to lose control and crash. So, whether you are - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 233
the path ahead clear? Will the surface texture change abruptly up ahead? Does the travel take you uphill or downhill? Will you have turns, or sudden braking. Off-roading requires a different kind of alertness from driving on paved roads and highways. There are no road signs, posted speed limits, or - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 234
hill, for example, there may be a smooth, constant incline with only a small change in elevation where you can easily see all the way to the top. On a up. • Is there good traction on the hillside, or will the surface cause tire slipping? • Is there a straight path up or down the hill so you will - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 235
slow down and stay alert. • If the engine has stopped running, you need to restart it. With the brake pedal pressed and the parking brake still applied, shift the automatic transmission to P (Park) or the manual transmission to Neutral and restart the engine. Then, shift to R (Reverse), release the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 236
to prevent a stall by shifting into N (Neutral), or pressing the clutch pedal if the vehicle has a manual transmission, to rev-up the engine and regain forward momentum. This will not work. The vehicle can roll backward very quickly and could go out of control. { WARNING: Shifting the transfer - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 237
roading gear so engine drag can help the brakes so they do not have to do all the work. Descend the transmission in N (Neutral), called free-wheeling. The brakes will have to do all the work regular brakes and apply the parking brake. 2. Shift to P (Park) and, while still braking, restart the engine - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 238
weight on the downhill wheels which could cause a downhill slide or a rollover. • Surface conditions can be a problem. Loose gravel, muddy spots, or even wet grass can cause the tires across. When going straight up or down a hill, the length of the wheel base - the distance from the front wheels - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 239
. When driving on sand, wheel traction changes. On loosely packed sand, such as on beaches or sand dunes, the tires will tend to sink into the sand. avoid sharp turns or abrupt maneuvers. Hard packed snow and ice offer the worst tire traction. On these surfaces, it is very easy to lose control. On - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 240
can cause glazing and uneven braking. Check the body structure, steering, suspension, wheels, tires, and exhaust system for damage and check the fuel lines and cooling system for any leakage. The vehicle requires more frequent service due to off-road use. Refer to the Maintenance Schedule for - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 241
- by alcohol or drugs, with night vision problems, or by fatigue. Night driving tips include: • Drive defensively. • Do not drink and drive. • Reduce headlamp glare by adjusting the inside rearview mirror. Watch for animals. When tired, pull off the road. Do not wear sunglasses. Avoid staring - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 242
large puddles and deep-standing or flowing water. Hydroplaning Hydroplaning is dangerous. Water can build up under your vehicle's tires so they actually ride on the water. This can happen if the road is wet enough and you are going fast enough. When your vehicle is hydroplaning, it has little or no - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 243
? Fuel, Engine Oil, Other Fluids: All levels checked? Lamps: Do they all work and are lenses clean? Tires: Are treads good? Are tires inflated to recommended pressure? up-to-date maps? • Keep the vehicle well ventilated. • Keep interior temperature cool. • Keep your eyes moving - scan the road ahead - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 244
none going down a hill. You could crash. Always have the engine running and the vehicle in gear when going downhill. • Keep the vehicle serviced and in good shape. • Check all fluid levels and brakes, tires, cooling system, and transmission. • Going down steep or long hills, shift to a lower gear - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 245
Ice Drive carefully when there is snow or ice between the tires and the road, creating less traction or grip. Wet ice can occur at about roads, but slow down and adjust your driving to the road conditions. When driving through deep snow, it might be beneficial to turn off the traction control part - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 246
fresh air. Fully open the air outlets on or under the instrument panel. Adjust the Climate Control system to a setting that circulates the air inside the monoxide, see Engine Exhaust on page 3-34. Snow can trap exhaust gases under your vehicle. This can cause deadly CO (carbon monoxide) gas to get - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 247
be careful. To save fuel, run the engine for only short periods as needed to warm the vehicle and then shut the engine off and close the window your vehicle's tires spin at high speed, they can explode, and you or others could be injured. The vehicle can overheat, causing an engine compartment fire - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 248
between R (Reverse) and a forward gear, or with a manual transmission, between 1 (First) or 2 (Second) and R (Reverse), spinning the it might need to be towed out. Recovery hooks can be used, if the vehicle has them. If the vehicle does need to be towed out, see Towing Your Vehicle on page - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 249
nonfactory-installed options. Two labels on your vehicle show how much weight it may properly carry, the Tire and Loading Information label and the Certification/Tire label. { WARNING: Notice: Never use recovery hooks to tow the vehicle. Your vehicle could be damaged and it would not be covered by - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 250
to the driver side extended cab door, above the door latch post. The Tire and Loading Information label shows the number of occupant seating positions (A), and the maximum vehicle capacity weight (B) in kilograms and pounds. The Tire and Loading Information label also shows the size of the original - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 251
cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, the load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 252
Example 1 = Subtract Occupant Weight 150 lbs (68 kg) x 2 = Available Cargo Weight = Total 1,000 lbs (453 kg) 300 lbs (136 kg) 700 lbs (317 kg) Item A B C Description Vehicle Capacity Weight for Example 2 = Subtract Occupant Weight 150 lbs (68 kg) x 5 = Available Cargo Weight = Total 1,000 lbs - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 253
Refer to your vehicle's Tire and Loading Information label for specific information about your vehicle's capacity weight and seating positions. The combined weight of the driver, passengers, cargo, and any accessories or equipment added to your vehicle after it left the factory should never exceed - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 254
center pillar, like extended cab models, will have the Certification/Tire label attached to the edge of the driver side, extended cab door, below the door latch post. The label shows the Gross Vehicle Weight Rating (GVWR). The GVWR includes the weight of the vehicle, all occupants, fuel, cargo, and - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 255
{ WARNING: Do not load the vehicle any heavier than the Gross Vehicle Weight Rating (GVWR), or either the maximum front or rear Gross Axle Weight Rating (GAWR). If you do, parts on the vehicle can break, and it can change the way your vehicle handles. These could cause you to lose control and crash. - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 256
would not be covered by the vehicle warranty. Do not install a slide-in camper or similar equipment on the vehicle. Pickup Conversion to Chassis Cab We are aware that some vehicle owners might consider having the pickup box removed and a commercial or recreational body installed. However, we - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 257
with all four wheels off the ground. Consult your dealer/retailer or a professional towing service if the disabled vehicle must be towed. See Roadside Assistance Program on page 8-7. To tow the vehicle behind another vehicle for recreational purposes, such as behind a motorhome, see "Recreational - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 258
should not be towed with all four wheels on the ground. Two-wheel-drive transmissions have no provisions for internal lubrication while being towed. 5-42 1. Position the vehicle being towed behind the tow vehicle. 2. Put an automatic transmission in P (Park) or a manual transmission in 1 (First - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 259
3. Turn the engine off and firmly set the parking brake. See Parking Brake on page 3-30. 4. Securely attach the vehicle being towed to the tow vehicle. 5. Shift the transfer case to N (Neutral). See "Shifting into N (Neutral)" under Four-Wheel Drive on page 3-25. 6. Turn the ignition to LOCK/OFF and - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 260
Off the Ground) Two-Wheel-Drive Vehicles Notice: If a two-wheel-drive vehicle is towed with the rear wheels on the ground, the transmission could be damaged. The repairs would not be covered by the vehicle warranty. Never tow the vehicle with the rear wheels on the ground. Two-wheel-drive vehicles - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 261
tow vehicle following the dolly manufacturer's instructions. 2. Drive the front wheels onto the dolly. 3. Put an automatic transmission in P (Park) or a manual transmission in 1 (First). 4. Turn the engine towed is firmly attached to the towing vehicle. 8. Turn the ignition to LOCK/OFF. After towing, - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 262
30. 4. Put an automatic transmission in P (Park) or a manual transmission in 1 (First). 5. Secure the vehicle to the dolly following the manufacturer's instructions. 6. Use an adequate clamping device designed for towing to ensure that the front wheels are locked into the straight position. 7. Turn - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 263
on page 3-30. 4. Put an automatic transmission in P (Park) or a manual transmission in 1 (First). 7. Shift the transfer case to N (Neutral). See "Shifting into N (Neutral)" under Four-Wheel Drive on page 3-25. 8. Turn the ignition to LOCK/OFF. If the vehicle being towed will not be started or driven - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 264
vehicle, read the information in "Weight of the Trailer" that appears later in this section. Trailering is different than just driving the vehicle by itself. Trailering means changes in handling, acceleration, braking, durability and fuel economy. Successful, safe trailering takes correct equipment - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 265
of additional optional equipment, passengers and cargo in the tow vehicle must be subtracted from the maximum trailer weight. • Consider using a sway control. See "Hitches" later in this section. • Do not tow a trailer at all during the first 500 miles (800 km) the new vehicle is driven. The engine - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 266
the vehicle model and options. Vehicle 2WD Regular Cab 2.9L L4 Automatic Transmission 2.9L L4 Manual Transmission 3.7L L5 Automatic Transmission 2WD Extended Cab 2.9L L4 Automatic Transmission 2.9L L4 Manual Transmission 3.7L L5 Automatic Transmission 5.3L V8 Automatic Transmission 5.3L V8 Automatic - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 267
Vehicle 4WD Regular Cab 2.9L L4 Automatic Transmission 2.9L L4 Manual Transmission 3.7L L5 Automatic Transmission 4WD Extended Cab 2.9L L4 Automatic Transmission 2.9L L4 Manual Transmission 3.7L L5 Automatic Transmission 5.3L V8 Automatic Transmission 4WD Crew Cab 3.7L L5 Automatic Transmission - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 268
curb weight of the vehicle, any cargo carried in it, and the people who will be riding in the vehicle. If there are a lot of options, equipment, passengers or cargo in the vehicle, it will reduce the tongue weight the vehicle can carry, which will also reduce the trailer weight the vehicle can tow - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 269
Do not exceed the maximum allowable tongue weight for the vehicle. Choose the shortest hitch extension that will position the hitch ball closest to the vehicle. This will help reduce the effect of trailer tongue weight on the rear axle. After loading the trailer, weigh the trailer and then the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 270
If the vehicle has many options and there is a front seat passenger and two rear seat passengers with some luggage and gear in the vehicle as well. 300 lbs (136 kg) could be added to the front axle weight and 400 lbs (181 kg) to the rear axle weight. The vehicle now weighs: The effect of - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 271
to have the correct hitch equipment. Crosswinds, large trucks going by and rough roads are a few reasons why the right hitch is needed. Weight-Distributing Hitches and Weight Carrying Hitches A step bumper hitch can be used for trailers up to 2,000 lbs (907 kg) total weight, and 200 lbs (90 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 272
outside air and set the fan speed to the highest setting. See Climate Control System in the Index. For more information about carbon monoxide, see Engine Exhaust on page 3-34. Towing a trailer requires a certain amount of experience. Get to know the rig before setting out for the open road. Get - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 273
turns than normal. Do this so the trailer will not strike soft shoulders, curbs, road signs, trees or other objects. Avoid jerky or sudden maneuvers. Signal well in advance. Passing More passing distance is needed when towing a trailer. Because the rig is longer, it is necessary to go much farther - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 274
turned off immediately after towing at high altitude on steep uphill grades, the vehicle may show signs similar to engine overheating. To avoid this, let the engine run while parked, preferably on level ground, with an automatic transmission in P (Park) or a manual transmission in N (Neutral) with - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 275
for vehicles with an automatic transmission, or into gear for vehicles with a manual transmission. Turn the wheels into the curb if facing downhill or into on a Hill 1. Apply and hold the brake pedal while you: • Start the engine • Shift into a gear • Release the parking brake 2. Let up on the brake - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 276
, weigh the vehicle without the spring bars in place. The best performance is obtained by correctly spreading out the weight of the load and choosing the correct hitch and trailer brakes. For more information see Towing a Trailer on page 5-48. Trailer Wiring Harness The vehicle may be equipped with - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 277
...6-8 Filling a Portable Fuel Container ...6-10 Checking Things Under the Hood ...6-10 Hood Release ...6-11 Engine Compartment Overview ...6-12 Engine Oil ...6-15 Engine Oil Life System ...6-18 Engine Air Cleaner/Filter ...6-20 Automatic Transmission Fluid ...6-21 Manual Transmission Fluid ...6-25 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 278
) ...6-110 Service Parts Identification Label ...6-110 Electrical System ...6-111 Add-On Electrical Equipment ...6-111 Windshield Wiper Fuses ...6-111 Fuses and Circuit Breakers ...6-111 Engine Compartment Fuse Block ...6-112 Capacities and Specifications ...6-118 Tires ...6-57 Tire Sidewall Labeling - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 279
dealer/retailer can accessorize the vehicle using genuine GM Accessories. When you go to your GM dealer/ retailer and ask for GM Accessories, you will know that GM-trained and supported service technicians will perform the work using genuine GM Accessories. Also, see Adding Equipment to Your Airbag - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 280
of California to cause cancer and birth defects or other reproductive harm. Engine exhaust, many parts and systems, many fluids, and some component wear by-products contain and/or emit these chemicals. Doing Your Own Service Work { WARNING: You can be injured and the vehicle could be damaged if - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 281
all parts receipts and list the mileage and the date of any service work performed. See Maintenance Record on page 7-14. Adding Equipment to the Outside of the Vehicle Things added to the outside of the vehicle can affect the airflow around it. This can cause wind noise and can affect fuel economy - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 282
customers who do not use TOP TIER Detergent Gasoline regularly, one bottle of GM Fuel System Treatment PLUS, added to the fuel tank at every engine oil change, can help clean deposits from fuel injectors and intake valves. GM Fuel System Treatment PLUS is the only gasoline additive recommended by - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 283
the performance of the emission control system could be affected. The malfunction indicator lamp might turn on. If this occurs, return to your dealer/retailer for service. Fuels in Foreign Countries If you plan on driving in another country outside the United States or Canada, the proper fuel might - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 284
read and follow all the instructions on the fuel pump island. Turn off the engine when refueling. Do not smoke near fuel or when refueling the vehicle pumping fuel. Keep children away from the fuel pump; never let children pump fuel. The tethered fuel cap is located behind a hinged fuel door on - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 285
has been left off or improperly installed. This would allow fuel to evaporate into the atmosphere. If the fuel cap is not properly installed, the FUEL CAP message appears on the Driver Information Center (DIC) and the check engine light will be lit on the instrument panel cluster. See DIC Warnings - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 286
• Dispense fuel only into approved containers. • Do not fill a container while it is inside a vehicle, in a vehicle's trunk, pickup bed, or fuel. • Do not use a cellular phone while pumping fuel. { WARNING: Things that burn can get on hot engine parts and start a fire. These include liquids like fuel - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 287
handle with this symbol on it. It is located inside the vehicle on the lower left side of the instrument panel. 3. Lift the hood. 4. Release the hood prop from its the hood, be sure all the filler caps are on properly. Then lift the hood to relieve pressure on the hood prop. Remove the hood prop - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 288
Engine Compartment Overview When you open the hood on the 3.7L engine (2.9L engine similar), you will see the following: 6-12 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 289
Washer Fluid on page 6-38. B. Engine Coolant Recovery Tank. See Engine Coolant on page 6-29. C. Engine Air Cleaner/Filter on page 6-20. D. Power Steering Fluid Reservoir (low in engine compartment). See Power Steering Fluid on page 6-37. E. Automatic Transmission Fluid Dipstick (If Equipped). See - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 290
When you open the hood on the 5.3L engine, you will see the following: 6-14 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 291
B. Air Filter Restriction Indicator (If Equipped). See Engine Air Cleaner/Filter on page 6-20. C. Windshield Washer Fluid Reservoir. See "Adding Washer Fluid" under Windshield Washer Fluid on page 6-38. D. Engine Coolant Recovery Tank. See Engine Coolant on page 6-29. E. Automatic Transmission Fluid - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 292
level gets above the cross-hatched area that shows the proper operating range, the engine could be damaged. See Engine Compartment Overview on page 6-12 for the location of the engine oil fill cap. L4 and L5 Engines V8 Engine If the oil is below the cross-hatched area (L), add at least one quart - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 293
fied as meeting GM Standard GM6094M and showing the American Petroleum Institute Certified For Gasoline Engines starburst symbol. Failure to use the recommended oil can result in engine damage not covered by the vehicle warranty. Cold Temperature Operation • GM6094M Use only an oil that meets GM - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 294
over a year. However, the engine oil and filter must be changed at least once a year and at this time the system must be reset. Your dealer/retailer has trained people who will perform this work using genuine parts and reset the system. It is also important to check the oil regularly and keep it at - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 295
several beeps sound. This confirms that the oil life system has been reset. 4. Turn the key to LOCK/OFF. If the CHANGE OIL message comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure. See DIC Warnings and Messages on page 4-37. What - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 296
filter at each engine oil change. How to Inspect the Engine Air Cleaner/Filter To inspect or replace the engine air cleaner/filter, do the following: 1. Unfasten the clips that hold the cover on and remove the cover. The engine air cleaner/filter is located in the engine compartment on the passenger - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 297
careful working on the engine with the air cleaner/filter off. Notice: If the air cleaner/filter is off, a backfire can cause a damaging engine fire. And, dirt can easily get into the engine, which will damage it. Always have the air cleaner/filter in place when you are driving. When to Check and Change - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 298
service department. If adding it yourself, be sure to follow all the instructions here, or there could be a false reading on the dipstick. Notice: Too much or too little fluid can damage your transmission. Too much can mean that some of the fluid could come out and fall on hot engine parts or exhaust - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 299
4. Let the engine run at idle for three minutes or more. Then, without shutting off the engine: 1. Flip the handle up and then pull out the dipstick and wipe it with a clean rag or paper towel. The automatic transmission dipstick handle with this symbol on it is located in the engine compartment on - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 300
transmission fluid may damage the vehicle, and the damages may not be covered by the vehicle's warranty. Always use the automatic transmission down to lock the dipstick in place. • After adding fluid, recheck the fluid level as described under "How to Check Automatic Transmission Fluid," earlier - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 301
fluid in the manual transmission does not require changing. After this is done: How to Check Because this operation can be a little difficult, you may choose to have this done at your GM dealer/retailer service department. If doing it yourself, be sure to follow all the instructions here, or there - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 302
hole. 3. Install the filler plug. Be sure the plug is fully seated. Hydraulic Clutch The hydraulic clutch linkage in the vehicle is self-adjusting. The this symbol on it. See Engine Compartment Overview on page 6-12 for reservoir location. It is not necessary to regularly check clutch fluid unless a - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 303
When to Check and What to Use Cooling System The cooling system allows the engine to maintain the correct working temperature. Refer to the Maintenance Schedule to determine how often to check the fluid level in the clutch master cylinder reservoir and for the proper fl - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 304
{ WARNING: An electric engine cooling fan under the hood can start up even when the engine is not running and can cause injury. Keep hands, clothing, and tools away from any underhood electric fan. 5.3L Engine A. Coolant Recovery Tank B. Radiator Pressure Cap C. Engine Cooling Fan 6-28 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 305
Coolant { WARNING: Heater and radiator hoses, and other engine parts, can be very hot. Do not touch them. If you do, you can be burned. Do not run the engine if there is a leak. If you run the engine, it could lose all coolant. That could cause an engine fire, and you could be burned. Get any leak - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 306
could overheat and be badly damaged. The repair cost would not be covered by the vehicle warranty. Too much water in the mixture can freeze and crack the engine, radiator, heater core, and other parts. Notice: If extra inhibitors and/or additives are used in the vehicle's cooling system, the vehicle - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 307
level should be at least up to the FULL COLD mark. If it is not, there could be a leak in the cooling system. It is located toward the rear of the engine compartment on the passenger side of the vehicle. See Engine Compartment Overview on page 6-12 for more information on - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 308
on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough. Do not spill coolant on a hot engine. Notice the coolant recovery tank. An electric engine cooling fan under the hood can start up even when the engine is not running and can cause injury. Keep - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 309
is cool before this is done. 3. Fill the radiator with the proper DEX-COOL® coolant mixture, up to the base of the filler neck. See Engine Coolant on page 6-29 for more information about the proper coolant mixture. 1. Remove the radiator pressure cap when the cooling system, including the upper - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 310
neck, reinstall the pressure cap. Notice: If the pressure cap is not tightly installed, coolant loss and possible engine damage may occur. Be sure the cap is properly and tightly secured. 6. Start the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 311
Coolant Temperature Gage on page 4-27. If the engine is too hot, the air conditioning might stop working. This is normal and helps cool the engine. You may decide not to lift the hood when the warning appears, but instead get service help right away. See Roadside Assistance Program on page 8-7. If - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 312
steam can be seen or heard, the problem may not be too serious. Sometimes the engine can get a little too hot when the air to cool the engine. In most everyday driving conditions, the clutch is not engaged. This improves fuel economy and reduces fan noise. Under heavy vehicle loading, trailer towing - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 313
located near the front of the engine compartment, behind the radiator. See Engine Compartment Overview on page 6-12 for reservoir location. How to Check Power Steering Fluid 1. Turn the key off and let the engine to regularly check indicate a problem. Have the covered by the vehicle's warranty. Always - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 314
concentrated washer fluid, follow the manufacturer's instructions for adding water. • Do not mix and damage your washer fluid tank and other parts of the washer system. Also, water does not the tank is full. See Engine Compartment Overview on page 6-12 for reservoir location. • Fill the washer fluid - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 315
reservoir is filled with DOT 3 brake fluid. See Engine Compartment Overview on page 6-12 for the location of the reservoir. Do not top off the brake fl when work is done on the brake hydraulic system. { WARNING: If too much brake fluid is added, it can spill on the engine and burn, if the engine is - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 316
, just a few drops of mineral-based oil, such as engine oil, in the brake hydraulic system can damage brake hydraulic system parts so badly that they will have to be replaced. Do not let someone put in the wrong kind of fluid. After work is done on the brake hydraulic system, make sure - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 317
drums should be removed and inspected each time the tires are removed for rotation or changing. When you have the front brake pads replaced, the brakes will not work well. That could lead to an accident. When the brake wear warning sound is heard, have the vehicle serviced. Notice: Continuing to - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 318
balance between the front and rear brakes can change - for the worse. The braking performance expected can change in many other ways if the wrong replacement brake parts are installed. { DANGER: Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 319
in P (Park) or a manual transmission in Neutral before setting the parking brake. If you have a four-wheel-drive vehicle, be sure the transfer case is not in Neutral. { WARNING: Batteries can hurt you. They can be dangerous because: • They contain acid that can burn you. • They contain gas that can - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 320
the cigarette lighter or the accessory power outlets. Turn off the radio and all lamps that are not needed. This will avoid sparks and help save both batteries. And it could save the radio! 4. Open the hoods and locate the positive (+) and negative (−) terminal locations on the other vehicle. Your - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 321
you badly. Keep your hands away from moving parts once the engine is running. 5. Check that the jumper cables do not (+) terminal if the vehicle has one. Negative (−) will go to a heavy, unpainted metal engine part or to a remote negative (−) terminal if the vehicle has one. Do not connect positive - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 322
vehicle with the good battery and run the engine for a while. 11. Try to start the vehicle that had the dead battery. If it will not start after a few tries, it probably needs service. Notice: If the jumper cables are connected or removed in the wrong order, electrical shorting may occur and damage - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 323
When to Check and Change Lubricant It is not necessary to regularly check rear axle fl problem. Have it inspected and repaired. To get an accurate reading, the vehicle should be on a level surface. The proper level is from 0 to 3/8 inch (0 mm to 10 mm) below the bottom of the filler plug hole, located - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 324
accurate reading, the vehicle should be on a level surface. A. Drain Plug B. Filler Plug If the level is below the bottom of the filler plug hole, located on the transfer case, you'll need to add some lubricant. Remove the plug and add enough lubricant to raise the level to the bottom - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 325
to Check and Change Lubricant It is not necessary to regularly check your front axle fluid unless you suspect there is a leak or you hear an unusual noise. A fluid loss could indicate a problem. Have it inspected and repaired. If the level is below the bottom of the filler plug hole, located on the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 326
6-54. For any bulb changing procedure not listed in this section, contact your dealer/retailer. Halogen Bulbs { WARNING: Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb. You or others could be injured. Be sure to read and follow the instructions on the bulb - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 327
it straight out. A. Low-Beam Headlamp/Daytime Running Lamps (DRL) B. High-Beam Headlamp To replace one of these bulbs: 1. Open the hood. See Hood Release on page 6-11. 2. Reach in and access the bulb sockets from inside the engine compartment. 4. Unplug the electrical connector from the old bulb by - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 328
Front Turn Signal, Parking and Daytime Running Lamps (DRL) To replace one of these bulbs: 1. Open bulb: 1. Remove the two screws and lift off the lamp assembly from the vehicle. 2. Reach in to access either one of the bulb sockets in the engine compartment. 3. Turn the bulb socket counterclockwise - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 329
/Taillamp B. Turn Signal/Taillamp C. Back-up Lamp To replace one of these bulbs: 1. Open the tailgate. See Tailgate on page 3-8. 2. Remove the two rear lamp assembly screws near the tailgate latch. 3. Pull the lamp assembly away from the vehicle. 4. Turn the bulb socket counterclockwise to remove - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 330
Lamp To replace one of these bulbs: Replacement Bulbs Exterior Lamp Center High-Mounted Stoplamp (CHMSL) License Plate Bulb Headlamps High-beam Low-beam/Daytime Running Lamp (DRL) Parking/Front Turn Signal 9005 9006 3757KA 3157A 3057 Bulb Number 912 W5W 1. Reach under the rear bumper for the bulb - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 331
For proper type and length, see Maintenance Replacement Parts on page 7-12. covered by your warranty. Do not allow the wiper blade arm to touch the windshield. 1. To remove the old wiper blades, lift the wiper arm until it locks into a vertical position. A. Blade Assembly B. Arm Assembly C. Locking - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 332
plastic caps (C) will be forced off as the insert is fully inserted. 5. Be sure that the notches are locked by the bottom claws. Make sure that all other claws are properly locked on both sides of the insert slots. 6-56 A. Claw in Notch B. Correct Installation C. Incorrect Installation 6. Put the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 333
vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions about your tire warranty and where to obtain service, see your vehicle Warranty booklet for details. For additional information refer to the tire manufacturer. WARNING: (Continued) • Underinflated - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 334
spare tire sidewall. (A) Tire Size: The tire size is a combination of letters and numbers used to define a particular tire's width, height, aspect ratio, construction type and service description. See the "Tire Size" illustration later in this section for more detail. (B) TPC Spec (Tire Performance - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 335
needed to support that load. (A) Temporary Use Only: The compact spare tire or temporary use tire has a tread life of approximately 3,000 miles (5 000 km) and should not be driven at speeds over 65 mph (105 km/h). The compact spare tire is for emergency use when a regular road tire has lost air and - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 336
, aspect ratio, construction type and service description. The letter T as the first character in the tire size means the tire is for temporary use only. (G) TPC Spec (Tire Performance Criteria Specification): Original equipment tires designed to GM's specific tire performance criteria have a TPC speci - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 337
weight of optional accessories. Some examples of optional accessories are, automatic transmission, power steering, power brakes, power windows, power seats, and air conditioning. Aspect Ratio: The relationship of a tire's height to its width. Belt: A rubber coated layer of cords that is located - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 338
for air pressure. Light Truck (LT-Metric) Tire: A tire used on light duty trucks and tire. Maximum Loaded Vehicle Weight: The sum of curb weight, accessory weight, vehicle capacity weight, and production options weight. Normal Occupant Weight: The number of occupants a vehicle is designed to seat - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 339
Maximum Load on the Tire: Load on an individual tire due to curb weight, accessory weight, occupant weight, and cargo weight. Vehicle Placard: A label permanently attached to a vehicle showing the vehicle's capacity weight and the original equipment tire size and recommended inflation pressure - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 340
• Premature or irregular wear • Poor handling • Reduced fuel economy If your tires have too much air (over-inflation), you can get the following: • Unusual wear • Poor handling • Rough ride • Needless damage from road hazards A vehicle specific Tire and Loading Information label is attached to your - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 341
speed limits and road conditions are such that a vehicle can be driven at high speeds, make sure the tires are rated for high speed operation, in excellent condition, and set to the correct cold tire inflation pressure for the vehicle load. If your vehicle has P235/50R18 size tires, they will require - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 342
at 35 psi (241 kPa). Tire Pressure Monitor System The Tire Pressure Monitor System (TPMS) uses radio and sensor technology to check tire pressure levels. The TPMS sensors monitor the air pressure in your vehicle's tires and transmit tire pressure readings to a receiver located in the vehicle. Each - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 343
detected, the TPMS illuminates the low tire pressure warning light located on the instrument panel cluster. Federal Communications Commission (FCC) and Industry and Science Canada See Radio Frequency Statement on page 8-18 for information regarding Part 15 of the Federal Communications Commission - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 344
message come on at each ignition cycle until the problem is corrected. Some of the conditions that can cause the malfunction light and DIC message to come on are: • One of the road tires has been replaced with the spare tire. The spare tire does not have a TPMS sensor. The TPMS malfunction light - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 345
tire, passenger side front tire, passenger side rear tire, and driver side rear tire using a TPMS diagnostic tool. See your dealer/retailer for service. The TPMS sensors can also be matched to each tire/wheel position by increasing or decreasing the tire's air pressure. If increasing the tire's air - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 346
below: 1. Set the parking brake. 2. Turn the ignition switch to ON/RUN with the engine off. 3. Turn the exterior lamp switch from AUTO to OFF four times within three seconds. A double horn chirp will sound and the TPMS low tire warning light starts flashing. The double horn chirp and flashing TPMS - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 347
000 km). See Scheduled Maintenance on page 7-3. The purpose of a regular tire rotation is to achieve a uniform wear for all tires on the vehicle. This will ensure that your vehicle continues to perform most like it did when the tires were new. The first rotation is the most important. See Scheduled - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 348
of tread remaining. Some commercial truck tires may not have treadwear indicators. { WARNING: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident. When you change a wheel, remove any rust or - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 349
of your vehicle, including brake system performance, ride and handling, traction control, and tire pressure monitoring performance. GM's TPC Spec number is molded onto the tire's sidewall near the tire size. If the tires have an all-season tread design, the TPC spec number will be followed by an MS - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 350
for more information about the Tire and Loading Information Label and its location on your vehicle. { WARNING: Mixing tires could cause you to lose control of your vehicle while driving. If you mix tires of different sizes, brands, or types (radial and bias-belted tires) the vehicle may not handle - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 351
the tires available on General Motors passenger cars and light trucks may vary with respect to these grades, they must also conform to federal safety requirements and additional General Motors Tire Performance Criteria (TPC) standards. { WARNING: If you add different sized wheels, your vehicle - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 352
the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices, and differences in road characteristics and climate. Temperature - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 353
. Notice: The wrong wheel can also cause problems with bearing life, brake cooling, speedometer or odometer calibration, headlamp aim, bumper height, vehicle ground clearance, and tire or tire chain clearance to the body and chassis. See Changing a Flat Tire on page 6-80 for more information. Wheel - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 354
a crash. Use another type of traction device only if its manufacturer recommends it for use on your vehicle and tire size combination and road conditions. Follow that manufacturer's instructions. To help avoid damage to your vehicle, drive slowly, readjust, or remove the device if it is contacting - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 355
a flat tire. If a tire goes flat, the next part shows how to use the jacking equipment to change a flat tire safely. If a Tire Goes Flat It is unusual for a tire to blowout while you are driving, especially if you maintain your vehicle's tires properly. If air goes out of a tire, it is much more - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 356
could be badly injured or even killed. Find a level place to change your tire. To help prevent the vehicle from moving: 1. Set the parking brake firmly. 2. Put an automatic transmission shift lever in P (Park), or shift a manual transmission to 1 (First) or R (Reverse). WARNING: (Continued) 6-80 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 357
following information explains how to use the jack and change a tire. A. Wing Nut B. Storage Bag and Tools The tools you will need are located under the right front passenger seat. 1. Move the seat all the way forward to locate the tool bag. 2. Locate the wing nut (A) used to retain the storage bag - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 358
Regular/Extended Cab For regular and extended cab vehicles, the jack and wheel blocks are located under the cover at the center of the vehicle behind the front seats. A. B. C. D. 1. Turn the wing nut on the cover counterclockwise to remove it. Jack Wheel Blocks Wing Nut Jack Knob 2. Lower the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 359
Crew Cab For crew cab models, the jack and wheel blocks are located under the driver side rear seat. 1. Reach under the rear seat to access the jack and wheel blocks. A. Jack Handle wheel wrench to remove the underbody-mounted spare tire. C. Jack Handle D. Wheel Wrench E. Wheel Blocks 6-83 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 360
1. Assemble the wheel wrench (D), the jack handle extensions (A) and the jack handle (C) as shown. 2. Insert the chiseled end of the jack handle (C) at a slight angle through the hole in the rear bumper and into the funnel-shaped guide. 6-84 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 361
wheel opening. Removing the Flat Tire and Installing the Spare Tire Use the following pictures and instructions to remove the flat tire and raise the vehicle. The (E). 5. Put the spare tire near the flat tire. 1. Do a safety check before proceeding. See Changing a Flat Tire on page 6-80 for more - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 362
2. Remove the center cap by placing the chisel end of the wheel wrench (E) into one of the slots on the wheel and gently prying the cap out. 3. Use the wheel wrench to loosen all the wheel nuts by turning it counterclockwise. Do not remove the wheel nuts yet. 6-86 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 363
could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. { WARNING: Raising your vehicle with the jack improperly and vehicle damage, be sure to fit the jack lift head into the proper location before raising the vehicle. Front Position 4. Position the jack - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 364
Front Position If the flat tire is on the front of the vehicle, position the jack to the rear of the front tire in the pocket off of the frame. Front Position - XFE For Extended Fuel Economy (XFE) vehicles, position the jack on the flat portion of the jacking pocket structure rearward of the jacking - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 365
. Raise the vehicle far enough off the ground so there is enough room for the spare tire to fit under the wheel well. 7. Remove all the wheel nuts and the flat tire. Rear Position If the flat tire is on the rear, position the jack under the rear axle and get as close as - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 366
9. Install the spare tire. { WARNING: { WARNING: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident. When changing a wheel, remove any rust or dirt from places where the wheel attaches to the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 367
Front Position Rear Position 11. Turn the wheel wrench counterclockwise to lower the vehicle. Lower the jack completely. 6-91 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 368
Follow the torque specification supplied by the aftermarket manufacturer when using accessory locking wheel nuts. See Capacities and Specifications you reinstall the regular wheel and tire, you must also reinstall the center cap. Place the cap on the wheel and tap it into place until it seats flush with - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 369
on page 6-96. To release the spare tire from the secondary latch: 1. Check under the vehicle to see if the cable end fitting is visible. { WARNING: Before beginning this procedure read all the instructions. Failure to read and follow the instructions could damage the hoist assembly and you and - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 370
blocks) under the vehicle towards the front of the rear bumper. Position the center lift point of the jack under the wheel. 9. Turn the wheel wrench clockwise to raise the jack until it lifts the tire. 10. Continue raising the jack until the tire stops moving upward and is held firmly in place. 6-94 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 371
during the procedure could be injured by the jack. If the spare tire does not slide off the jack completely, make sure no one is the spare while firmly pulling the jack out from under the spare tire with the other hand. If the spare tire is hanging from the cable, insert the hoist end of the extension - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 372
. Notice: Storing an aluminum wheel with a flat tire under your vehicle for an extended period of time or with the valve stem pointing up flat tire using the hoist assembly until it has been replaced. To continue changing the flat tire, see Removing the Flat Tire and Installing the Spare Tire on page - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 373
. 1. Put the tire on the ground at the rear of the vehicle with the valve stem pointed down. 3. Assemble the wheel wrench, the jack handle extensions, and the jack handle as shown. 2. Tilt the retainer downward and through the center wheel opening. Make sure the retainer is fully seated across the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 374
wheel wrench clockwise to raise the tire part way up. Make sure the retainer is seated in the wheel opening and the valve stem is pointed down. Continue raising the tire, watch to make sure it does not get caught on anything on the underbody. If the tire does get caught, loosen two or three - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 375
To store the jack and wheel blocks: Regular/Extended Cab 7. Make sure the tire is stored securely. Push, pull (A), and then try to turn (B) the tire. If the tire moves, check to make sure the tire valve stem is pointing down, then use the wheel wrench to loosen and then tighten the cable. To store - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 376
the way and insert the jack into the bracket. 4. Raise the jack by turning the handle clockwise to secure the jack within the bracket. Crew Cab 5. Put the cover in position and insert and tighten the wing nut to secure it. A. Jack B. Wheel Blocks C. Wing Nut 1. Attach the wheel blocks (B) to the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 377
-size spare tire, which, when new, was fully inflated. A spare tire may lose air over time, so check its inflation pressure regularly. See Inflation - Tire Pressure on page 6-64 and Loading the Vehicle on page 5-33 for information regarding proper tire inflation and loading your vehicle. For instruction - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 378
km). For heavy payloads or towing, and for low traction or four-wheel-drive conditions, repair or replace the full-size tire. Have the damaged or flat road tire repaired or replaced as soon as you can and installed back onto your vehicle. This way, the spare tire will be available in case you need it - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 379
, read and adhere to all safety instructions on the label. While cleaning the vehicle's interior, maintain adequate ventilation by opening the liquid cleaners, about 20 drops per gallon (3.78 L) of water is a good guide. Use only mild, neutral-pH soaps. • Too much cleaner that saturates the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 380
that are sold to preserve and protect leather may permanently change the appearance and feel of the leather and are not recommended. Do not use silicone or wax-based products, or those containing organic solvents to clean the vehicle's interior because they can alter the appearance by increasing - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 381
on plastic surfaces. Many commercial cleaners and coatings that are sold to preserve and protect soft plastic surfaces may permanently change the appearance and feel of the interior and are not recommended. Do not use silicone or wax-based products, or those containing organic solvents to clean the - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 382
it states that it should not be used on plastic parts, do not use it on the vehicle or damage may occur and it would not be covered by the warranty. Do not wash the vehicle in car washing soap to clean exterior lamps and lenses. Follow instructions under Washing Your Vehicle on page 6-106. 6-106 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 383
gives more depth and gloss to the colored basecoat. Always use waxes and polishes that covered whenever possible. Protecting Exterior Bright Metal Parts Bright metal parts should be cleaned regularly the windshield thoroughly when cleaning the blades. Bugs, road grime, sap, and a buildup of vehicle - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 384
not washed after driving on roads that have been sprayed with magnesium, calcium or sodium chloride. These chlorides are used on roads for conditions such as ice silicone carbide tire cleaning brushes, could damage the aluminum or chrome-plated wheels. The repairs would not be covered by the vehicle - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 385
on the underbody parts such as fuel lines, frame, floor pan, and exhaust system even though available from your dealer/retailer. Larger areas of finish damage can be corrected in your dealer's/retailer's body we will repair, at no charge to the owner, the surfaces of new vehicles damaged by this - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 386
for the vehicle's engine code. Service Parts Identification Label This label, on the inside of the glove box, has the following Tire and Service Parts labels and certificates of title and registration. Vehicle Identification Number (VIN) Model designation Paint information Production options - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 387
fires caused by electrical problems. Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Be sure you replace a bad fuse with a new one of the identical size and rating. If you ever have a problem on the road and do not have a spare fuse, you can borrow - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 388
the cover and lift. To reinstall the cover, line up the tab and push down on the cover until the tab clicks into place. Notice: Spilling liquid on any electrical components on the vehicle may damage it. Always keep the covers on any electrical component. The engine compartment fuse block is located - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 389
6-113 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 390
Module, Brake Switch, Clutch Disable Power Door Locks (If Equipped) Daylight Running Lamps Mass Air Flow (MAF) Sensor, Can Purge Solenoid, Air Injector Reactor (AIR) Relay Electronic Throttle Control (ETC) Fog Lamps (If Equipped) The trailer brake relay is located on the bottom side of the battery - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 391
Starter Switch, Neutral Safety Back-Up Switch, Ignition Coils 1-5, Air Conditioning Relay Injectors Driver Side Headlamp Power Control Module (PCM) B Power Control Module (PCM) Power Seat Circuit Breaker (If Equipped) Power Windows (If Equipped) Radio Fuses REAR PRK LAMP REAR PRK LAMP2 RT HDLP RVC - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 392
Fuse, Power Seat Fuse Front Parking Lamp Fuse, Rear Parking Lamps Powertrain, Electronic Throttle Control Fuse, Oxygen Sensor Fuse Relays RAP Usage Retained Accessory Power (Power Window Fuse, Wiper/Washer Switch Fuse), Sunroof Fuse Run/Crank, Airbag System Fuse, Cruise Control Fuse, Ignition Fuse - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 393
2.9L and 3.7L Fuses A B C D 5.3L Usage Trailer Park Lamp Communication Interface Module Supplemental Inflatable Restraint System, Sensing and Diagnostic Module Trailer Auxiliary Maxi-Fuse 6-117 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 394
the air conditioning system refrigerant charge amount, see the refrigerant caution label located under the hood. See your dealer/retailer for more information. Cooling System 2.9L L4 Engine 3.7L L5 Engine 5.3L V8 Engine Engine Oil with Filter 2.9L L4 Engine 3.7L L5 Engine 5.3L V8 Engine Fuel Tank - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 395
cont'd) Capacities Application Transmission Automatic (Pan Removal and Filter Replacement) Manual - Rear-Wheel Drive (Drain and Refill) Manual - Four-Wheel manual. Recheck fluid level after filling. Engine Specifications Type 2.9L L4 3.7L L5 5.3L V8 VIN Code 9 E P Transmission Automatic Manual - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 396
✍ NOTES 6-120 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 397
Section 7 Maintenance Schedule Recommended Fluids and Lubricants ...7-10 Maintenance Replacement Parts ...7-12 Engine Drive Belt Routing ...7-13 Maintenance Record ...7-14 Maintenance Schedule ...7-2 Introduction ...7-2 Scheduled Maintenance ...7-3 Owner Checks and Services ...7-8 7-1 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 398
helps to keep the vehicle in good working condition, improves fuel economy, and reduces vehicle emissions for better air quality. Because of all the different ways people use vehicles, maintenance needs vary. The vehicle might need more frequent checks and services. Please read the information under - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 399
000 to 8,000 miles). See Tire Inspection and Rotation on page 6-71. When the Change Oil message displays, certain services, checks, and inspections are required. The services described for Maintenance I should be performed at every engine oil change. The services described for Maintenance II should - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 400
Body hinges and latches, key lock cylinders, and folding seat hardware lubrication. Lubricate hood safety lever pivot and prop rod pivot and tailgate Engine Air Cleaner/ Filter on page 6-20. • Brake system inspection (or every 12 months, whichever occurs first). Maintenance II • Perform all services - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 401
inspection. See Tire Inspection and Rotation on page 6-71. Once a Year • Starter switch check. See Owner Checks and Services on page 7-8. First Engine Oil Change After Every 40 000 km/25,000 Miles • Fuel system inspection for damage or leaks. • Parking brake and automatic transmission P (Park - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 402
transmission fluid change (severe service) for vehicles mainly driven in heavy city traffic in hot weather, in hilly or mountainous terrain, when frequently towing a trailer, or used for taxi, police, or delivery service. See Automatic Transmission Fluid on page 6-21. • Engine accessory drive - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 403
Scheduled Maintenance Service Change engine oil and filter. Reset oil life system. Engine coolant level check. Windshield washer fluid level check. Tire inflation pressures check. Tire wear inspection. Rotate tires. Fluids visual leak check. Engine air cleaner filter inspection (vehicles driven in dusty - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 404
, and try to start the engine. The starter should work only when the clutch pedal is pushed down all the way to the floor. If the starter works when the clutch pedal is not pushed all the way down, your vehicle needs service. Automatic Transmission Shift Lock Control System Check { WARNING: When - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 405
Park) mechanism's holding ability: With the engine running, shift to P (Park). Then release the parking brake followed by the regular brake. Contact your dealer/retailer if service is required. 7-9 • For automatic transmission vehicles, the ignition should turn to LOCK/OFF only when the shift lever - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 406
Transmission Transmission Fluid. Manual Transmission Fluid Manual Part No. U.S. 89021806, Transmission (GM in Canada 89021807). Hydraulic Clutch Fluid Hydraulic (GM Part No. U.S. 12345347, Clutch System in Canada 10953517) or equivalent DOT-3 brake fluid. Multi-Purpose Lubricant, Superlube Key Lock - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 407
Hood and Door Hinges, Body Door Hinge Pins, Liftgate Hinge and Linkage, Folding Seats, and Fuel Door Hinge Outer Tailgate Handle Pivot Points and Hinges Weatherstrip Conditioning Fluid/Lubricant Multi-Purpose Lubricant, Superlube (GM Part No. U.S. 12346241, in Canada 10953474). Multi-Purpose - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 408
number, or specification can be obtained from your dealer/retailer. Part Engine Air Cleaner/Filter Engine Oil Filter 2.9L L4 Engine 3.7L L5 Engine 5.3L V8 Engine Spark Plugs 2.9L L4 and 3.7L L5 Engines 5.3L V8 Engine Wiper Blades Driver Side - 22 in (55 cm) Passenger Side - 19 in (48 cm) 10389562 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 409
Engine Drive Belt Routing 5.3L Engine 2.9L and 3.7L Engines 7-13 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 410
Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. Retain all maintenance receipts. Maintenance Record Date Odometer Reading Serviced By Services Performed 7-14 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 411
Maintenance Record (cont'd) Date Odometer Reading Serviced By Services Performed 7-15 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 412
Maintenance Record (cont'd) Date Odometer Reading Serviced By Services Performed 7-16 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 413
Privacy ...8-16 Event Data Recorders ...8-17 OnStar® ...8-18 Radio Frequency Identification (RFID) ...8-18 Radio Frequency Statement ...8-18 Customer Assistance and Information ...8-2 Customer Satisfaction Procedure ...8-2 Online Owner Center ...8-5 Customer Assistance for Text Telephone (TTY) Users - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 414
fication Number (VIN). This is available from the vehicle registration or title, or the plate at the top left of the instrument panel and visible through the windshield. • Dealership name and location. • Vehicle delivery date and present mileage. When contacting GMC, remember that your concern will - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 415
STEP THREE - U.S. Owners: Both General Motors and your dealer are committed to making This program is available in all 50 states and the District of Columbia. Eligibility is limited by vehicle age, mileage, and other factors. General Motors reserves the right to change eligibility limitations and/ - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 416
its participation in a no-charge Mediation/Arbitration Program. General Motors of Canada Limited has committed to binding arbitration of owner disputes involving factory-related vehicle service claims. The program provides for the review of the facts involved by an impartial third party arbiter, and - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 417
access to: • Digital owner manual, warranty information, and more • My Showroom: Find and save information on vehicles and current offers in your area. Online service and maintenance records Find GMC dealers for service nationwide Exclusive privileges and offers Recall notices for your speci - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 418
hard of hearing, or speech-impaired and who use the Text Telephones (TTYs), GMC has TTY equipment available at its Customer Assistance Center. Any TTY user can communicate with GMC by dialing: 1-800-GMC-8583 (462-8583). (TTY users in Canada can dial 1-800-263-3830.) From Puerto Rico 1-800-496-9992 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 419
you up to $1,000 of the cost of eligible aftermarket adaptive equipment required for your vehicle, such as hand controls or a wheelchair/scooter lift. The offer is available for a very limited period of time from the date of vehicle purchase/lease. For more details, or to determine your vehicle - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 420
Road or Highway: Tow to the nearest GMC dealer for warranty service, or if the vehicle was in a crash and cannot be driven. Assistance is also given when the vehicle is stuck in the sand, mud, or snow. • Flat Tire Change: Service is provided to change a flat tire with the spare tire. The spare tire - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 421
not covered by the warranty are the owner responsibility. Services Specific to Canadian Purchased Vehicles • Fuel delivery: Reimbursement is approximately $5 Canadian. Diesel fuel delivery may be restricted. Propane and other fuels are not provided through this service. • Lock-Out Service: Vehicle - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 422
offer Courtesy Transportation, a customer support program for vehicles with the New Vehicle Limited Warranty (Base Warranty Coverage period in Canada) and extended powertrain, and hybrid specific warranty in both the U.S. and Canada. Several courtesy transportation options are available to assist in - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 423
reimbursement of fuel or other transportation costs. Additional Program Information All program options, such as shuttle service, may not be available at every the proper equipment and quality replacement parts. Poorly performed collision repairs diminish your vehicle's resale value, and safety - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 424
parts are also available. These are made by companies other than GM and may not have been tested for your vehicle. As a result, these parts may fit poorly, exhibit premature durability/corrosion problems, and may not perform properly in subsequent collisions. Aftermarket parts are not covered - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 425
model and model or you are instructed to move it towing service will be taking it. Get a card from the tow truck operator or write down the driver's name, the service's name, and the phone number. • Once you have an estimate, read it carefully and make sure you understand what work will be performed - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 426
using aftermarket parts. Discuss this with your repair professional, and insist on Genuine GM parts. Remember if your vehicle is leased you group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or General - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 427
Canada Road Safety Branch 2780 Sheffield Road Ottawa, Ontario K1B 3V9 Service Publications Ordering Information Service Manuals Service Manuals have the diagnosis and repair information on engines, transmission, axle suspension, brakes, electrical, steering, body, etc. Service Bulletins Service - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 428
Model Order Forms Technical Service Bulletins and Manuals are available for current and past model GM vehicles. To request an order form, specify year and model vehicle uses computer modules to monitor and control engine and transmission performance, to monitor the conditions for airbag deployment - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 429
road obstacle, data that will assist in understanding how a vehicle's systems performed. gender, age, and crash location) is recorded. However, other owner or, if the vehicle is leased, with the consent of the lessee; in response to an official request of police or similar government office; as part - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 430
of the device. Changes or modifications to any of these systems by other than an authorized service facility could void authorization to use this equipment. Radio Frequency Identification (RFID) RFID technology is used in some vehicles for functions such as tire pressure monitoring and ignition - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 431
Required Services ...7-5 Additives, Fuel ...6-6 Add-On Electrical Equipment ...6-111 Add-On Equipment ...5-40 Adjusting the Speakers (Balance/Fade) ...4-48 Adjustment Chime Level ...4-63 Adjustments Headlamp Range ...2-8 After Off-Road Driving ...5-24 Air Cleaner/Filter, Engine ...6-20 Air - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 432
...3-21 Automatic Transmission Shift Lock Control System Check ...7-8 Axle, Rear ...6-47 B Backing Up ...5-57 Battery ...6-42 Electric Power Management ...4-14 Run-Down Protection ...4-15 Battery Replacement ...3-4 Before You Go Off-Roading ...5-13 Belt Routing, Engine ...7-13 Blizzard Conditions - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 433
Engine Exhaust ...3-34 Tailgate ...3-8 Winter Driving ...5-29 Care of Safety Belts ...6-105 CD Messages ...4-55 CD, MP3 ...4-56 Cellular Phone Usage ...4-62 Center Console Storage ...3-40 Center High-Mounted Stoplamp (CHMSL) ...6-52 Certification/Tire Label ...5-38 Chains, Tire ...6-78 CHANGE - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 434
Vinyl, and Other Plastic Surfaces ...6-105 Interior ...6-102 Leather ...6-104 Tires ...6-108 Underbody Maintenance ...6-109 Washing Your Daytime Running Lamps (DRL) ...4-11 Defensive Driving ...5-2 Dinghy Towing ...5-42 Disc, MP3 ...4-56 Doing Your Own Service Work ...6-4 Dolly Towing ...5-44 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 435
for Better Fuel Economy ...in Mud, Sand, Snow, or Ice ...in Water ...On Grades ...on Hills ...on Snow or Ice ...Uphill ...with a Trailer ... 1-19 5-23 5-24 5-58 5-17 5-29 5-18 5-56 E EDR ...8-16 Electrical Equipment, Add-On ...6-111 Electrical System Engine Compartment Fuse Block ...6-112 Fuses and - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 436
and Science Canada ...6-67 Filter Engine Air Cleaner ...6-20 Finding a Program Type (PTY) Station (RDS and XM) ...4-49 Finding a Station ...4-46 Finish Damage ...6-109 Fixed Mast Antenna ...4-63 Flashers, Hazard Warning ...4-3 Flash-to-Pass ...4-5 Flat Tire ...6-79 Flat Tire, Changing ...6-80 Flat - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 437
Specifications ...6-6 FUEL CAP ...4-39 Fuel Economy Driving for Better ...1-19 Fuses Engine Compartment Fuse Block ...6-112 Fuses and Circuit Breakers ...6-111 Windshield Wiper ...6-111 Gasoline Octane ...6-5 Specifications ...6-6 Getting Familiar with Off-Road Driving ...5-15 Glove Box ...3-40 GM - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 438
Hill and Mountain Roads ...5-28 Hitches ...5-55 Hood Checking Things Under ...6-10 Release ...6-11 Horn ...4-3 How OnStar Service Works ...1-21 How to Add Automatic Transmission Fluid ...6-24 How to Add Coolant to the Radiator ...6-32 How to Add Fluid ...6-26 How to Check ...6-25, 6-65 How to Check - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 439
...3-3 Keys ...3-2 L Labeling, Tire Sidewall ...6-58 Lamps Daytime Running (DRL) ...4-11 Dome ...4-13 59 Leaving the Vehicle With the Engine Running (Automatic Transmission) ...3-32 Lighting Exit ...4-14 Control System (TCS) Warning Light ...4-26 Tire Pressure ...4-28 Up-Shift ...4-24 Limited- - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 440
Door Security Locks ...3-7 Loss of Control ...5-12 LOW FUEL ...4-39 LOW TIRE ...4-39 Lower Anchors and Tethers for Children ...2-46 Lumbar Manual Controls ...2-3 Power Controls ...2-4 M Maintenance Schedule Maintenance Record ...7-14 Maintenance Replacement Parts ...7-12 Owner Checks and Services - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 441
- www.gmownercenter.com/gmc ...8-5 OnStar, Privacy ...8-18 Other Rainy Weather Tips ...5-26 Outlet Adjustment ...4-18 Outlets Accessory Power ...4-15 Outside Convex Mirror ...3-39 Manual Mirrors ...3-38 Power Mirrors ...3-38 Owner Checks and Services ...7-8 Owner Information ...8-15 Owners, Canadian - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 442
37 Windows ...3-11 Power Door Locks ...1-5 Power Lumbar ...1-8 Power Reclining Seatbacks ...2-6 Power Seats ...1-7 Power Steering ...5-9 Power Windows ...1-6 Pregnancy, Using Safety Belts ...2-33 Privacy ...8-16 Navigation System ...8-18 OnStar ...8-18 Radio Frequency Identification (RFID) ...8-18 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 443
...2-81 Replacing Restraint System Parts After a Crash ...2-82 Retained Accessory Power (RAP) ...3-18 Ride Control Systems Limited Slip Rear Axle ...5-9 Roadside Assistance Program ...8-7 Rocking Your Vehicle to Get it Out ...5-32 Roof Sunroof ...3-42 Running the Vehicle While Parked ...3-34 - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 444
) 4WD (Four-Wheel Drive) ...4-40 SERV (Service) TPM (Tire Pressure Monitor) ...4-40 SERV (Service) VEH (Vehicle) ...4-40 Service ...6-3 Accessories and Modifications ...6-3 Adding Equipment to the Outside of the Vehicle ...6-5 Doing Your Own Work ...6-4 Service (cont.) Engine Soon Lamp ...4-28 Parts - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 445
...7-8 Starting the Engine ...3-18 Steering ...5-9 Console ...3-40 Cupholders ...3-40 Glove Box ...3-40 Rear ...3-41 Stuck in ...3-12 Sunroof ...3-42 T Tachometer ...4-20 Tailgate ...3-8 Taillamps Turn Signal, Stoplamps and Back- Time, Setting ...4-43 Tire Size ...6-60 Tires ...6-57 Aluminum or - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 446
Wheel Replacement ...6-77 When It Is Time for New Tires ...6-72 To Use the Engine Coolant Heater ...3-20 Torque Lock (Automatic Transmission) ...3-32 Total Weight on the Vehicle's Tires ...5-54 Towing Recreational Vehicle ...5-41 Towing a Trailer ...5-48 Trailer Recommendations ...5-60 Your Vehicle - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 447
of the Trailer Tongue ...5-52 Weight-Distributing Hitches and Weight Carrying Hitches ...5-55 What Kind of Engine Oil to Use ...6-17 What to Do with Used Oil ...6-19 What to Use ...6-30, 6-37, 6-38, 6-47, 6-49 Wheels Alignment and Tire Balance ...6-77 Different Size ...6-75 Replacement ...6-77 When - 2010 GMC Canyon Extended Cab | Owner's Manual - Page 448
Check and Change Lubricant ...6-47, 6-49 When to Check and What to Use ...6-27 When to Check Power Steering Fluid ...6-37 When to Inspect the Engine Air Cleaner/Filter ...6-20 Where to Put the Child Restraint ...2-44 Why Safety Belts Work ...2-14 Window Lockout ...3-12 Windows ...3-10 Manual ...3-10