2006 Honda Accord Owner's Manual - Page 104

Vents, Heating, and A/C Mode Control Use the mode control buttons or icons to select the vents the air flows from. Some air flows from the dashboard corner vents in all modes. Air flows from the center and corner vents in the dashboard. Airflow is divided between the vents in the dashboard and the floor vents. Air flows from the floor vents. Airflow is divided between the floor vents and the defroster vents at the base of the windshield. Air flows from the defroster vents at the base of the windshield. When you select or , the system automatically switches to Fresh Air mode and turns on the A/C. In these modes, the A/C stays on with the indicator off. When you select , the system automatically switches to fresh air mode. EX-L and EX-V6 without Navigation System MAX A/C Button U.S. VP, SE, EX and LX-V6 Canadian DX-G, SE and SE-V6 The system automatically turns on the A/C, selects , and switches to recirculation mode. Each indicator above the button is on when the MAX A/C is turned on. Ventilation The flow-through ventilation system draws in outside air, circulates it through the interior, then exhausts it through vents near the rear window. 1. Set the temperature to the lower limit. 2. Make sure the A/C is off. and fresh air mode. 3. Select 4. Set the fan to the desired speed. Each time you press the MODE button, the display shows the mode selected. EX-L and EX-V6 with Navigation System Press the A/C button to view the display, then touch any of the mode icons on the display. 106