2006 Honda Accord Owner's Manual - Page 147
2006 Honda Accord Manual
Page 147 highlights
HomeLink Universal Transceiver If the red indicator in HomeLink continues to flash slowly (does not flash rapidly), your remote transmitter may stop transmitting after a short time. Go to step 4. 4. Press and hold the remote transmitter button and one of the HomeLink buttons at the same time. While continuing to hold the HomeLink button, press and release the remote transmitter button every 2 seconds. If the red indicator in HomeLink begins to flash slowly at first, then rapidly, release both buttons, and go to step 5. If the red indicator in HomeLink continues to flash slowly (does not begin to flash rapidly), repeat steps 2 thru 4. 5. Plug in the garage door opener motor, then test the HomeLink button by pushing it for about 1 second. If the button works, programming is complete. If the button does not work go to step 6. 6. Push and hold the HomeLink button for a few seconds, then watch the red indicator on HomeLink. If the indicator stays on or flashes slowly, repeat steps 2 thru 5. If the indicator flashes rapidly for 2 seconds then stays on, you have a rolling code transmitter: Go to ''Training with a Rolling Code System'' (see page 150 ). 7. Repeat these steps to train the other two HomeLink buttons to operate any other compatible remotely controlled devices around your home (lighting, automatic gate, security system, etc.). Features 3. Press and hold the remote transmitter button and one of the HomeLink buttons at the same time. If the red indicator in HomeLink begins to flash slowly at first, then rapidly, release both buttons, and go to step 5. 149