2009 Honda Accord Owner's Manual - Page 334

Main Menu Table Of Contents Lights 4. Install the new bulb, and turn it one-quarter turn clockwise to lock it in place. 5. Push the electrical connector onto the bulb. 6. Turn on the headlights to test the new bulb. 7. Driver's side on V6 models Reinstall the air intake cover and duct securely. Reinstall the fastener and secure it by pushing on the head until it locks. Passenger's side TAB Low Beam Headlight HOLDING CLIPS BULB Maintenance Reinstall the engine coolant reserve tank. 1. To change the passenger's side bulb, start the engine, turn the steering wheel all the way to the left, and turn off the engine. To change the driver's side bulb, turn the steering wheel to the right. 2. Use a flat-tipped screwdriver to remove the two holding clips from the inner fender. 3. Pull the inner fender cover away from the fender and bumper. 4. Remove the bulb by turning it approximately one-quarter turn counterclockwise. 5. Remove the electrical connector from the bulb by pushing on the tab to unlock it, then slide the connector off the bulb. CONTINUED 331 2009 Accord Sedan