2009 Honda Accord Owner's Manual - Page 337

Main Menu Table Of Contents Lights 5. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place. 6. Turn on the lights to make sure the new bulb is working. 7. Reinstall the inner fender cover. Then reinstall the holding clips, and lock them in place by pushing on their centers. SCREW Replacing Rear Bulbs BULB SOCKET 1. Open the trunk. Remove the screw in the center of the fastener on the side of the trunk lining. Pull the lining back. 2. Determine which of the three bulbs is burned out: stop/taillight, back-up light or turn signal light. 3. Remove the socket by turning it one-quarter turn counterclockwise. 4. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 5. Insert the socket back into the light assembly. Turn it clockwise to lock it in place. 334 2009 Accord Sedan