2009 Honda Accord Owner's Manual - Page 340
2009 Honda Accord Manual
Page 340 highlights
Main Menu Table Of Contents Lights HOLDING CLIPS 8. Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place. 9. Push the electrical connector back onto the bulb. Make sure it is on all the way. 10. Turn on the fog lights to test the new bulb. 11.Passenger's side Reinstall the under cover and put the three fasteners back in place. Driver's side TAB ELECTRICAL CONNECTOR 4. Driver's side To change the bulb, start the engine, turn the steering wheel all the way to the right, then turn off the engine. 5. Use a flat-tipped screwdriver to remove the two holding clips from the inner fender, and pull the inner fender cover back. 6. Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down. 7. Remove the bulb from the fog light assembly by turning it onequarter turn counterclockwise. Maintenance Reinstall the inner fender. Make sure it is installed under the edge of the front bumper. Reinstall the holding clips, and push in its head of each clip. 337 2009 Accord Sedan