2008 Jeep Commander Owner Manual - Page 213

UNDERSTANDING YOUR INSTRUMENT PANEL 213 will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. SCAN Button (Radio Mode) Pressing the SCAN button causes the tuner to search for the next listenable station, in AM, FM or Satellite (if equipped) frequencies, pausing for 5 seconds at each listenable station before continuing to the next. To stop the search, press the SCAN button a second time. Voice Recognition Button (UConnect™ Hands Free Phone) - If Equipped Press this button to operate the Hand Free Phone (UConnect™) feature (if equipped). Refer to "Hands-Free Communication (UConnect™)" in Section 3 for more information. If your vehicle is not equipped with or this feature is not available on your vehicle, a "UConnect™ System Not Available" message will display on the radio screen. Phone Button (UConnect™ Hands Free Phone) - If Equipped Press this button to operate the Hand Free Phone (UConnect™) feature (if equipped). Refer to "Hands-Free Communication (UConnect™)" in Section 3 for more information. If your vehicle is not equipped with or this feature is not available on your vehicle, a "UConnect™ System Not Available" message will display on the radio screen. TIME Button Press the TIME button and the time of day will display. In AM or FM mode, pressing the TIME button will switch between the time and frequency displays. Clock Setting Procedure 1. Press and hold the TIME button, until the hours blink. 2. Adjust the hours by turning the right side TUNE control knob. 4