2008 Jeep Commander Owner Manual - Page 92

92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE entry you wish to call. The first call will be on hold while the second call is in progress. To go back to the first call, refer to ЉToggling Between Calls.Љ To combine two calls, refer to ЉConference Call.Љ Place/Retrieve a Call from Hold To put a call on hold, press the ЈPhone' button until you hear a single beep. This indicates that the call is on hold. To bring the call back from hold, press and hold the "Phone" button until you hear a single beep. Toggling Between Calls If two calls are in progress (one active and one on hold), press the "Phone" button until you hear a single beep indicating that the active and hold status of the two calls have switched. Only one call can be placed on hold at one time. Conference Call When two calls are in progress (one active and one on hold), press and hold the "Phone" button until you hear a double beep indicating that the two calls have been joined into one conference call. Three-Way Calling To initiate three-way calling, press the "Voice Recognition" button while a call is in progress and make a second phone call as described under ЉMaking a Second Call while Current Call in Progress.Љ After the second call has established, press and hold the "Phone" button until you hear a double beep indicating that the two calls have been joined into one conference call. Call Termination To end a call in progress, momentarily press the "Phone" button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the far end, a call on