2010 Mercury Mariner Owner Guide 1st Printing (Spanish) - Page 456

Driver Controls Increasing speed while using speed control There are three ways to set a higher speed: • Press and hold the SET + control until you get to the desired speed, then release the control. • Press and release the SET + control to operate the Tap-Up function. Each tap will increase the set speed by 1 mph (1.6 km/h). • Use the accelerator pedal to get to the desired speed. When the vehicle reaches that speed press and release the SET + control. Reducing speed while using speed control There are three ways to reduce a set speed: • Press and hold the SET- control until you get to the desired speed, then release the control. • Press and release the SETcontrol to operate the Tap-Down function. Each tap will decrease the set speed by 1 mph (1.6 km/h). OFF ON SET SET RES • Press the brake pedal or the clutch pedal (if equipped) until the desired vehicle speed is reached and press the SET + control. Turning off speed control There are two ways to turn off the speed control: • Press the OFF control. • Turn off the ignition. Note: When you turn off the speed control or the ignition, your speed control set speed memory is erased. 76 2010 Mariner (mrn) Owners Guide, 1st Printing USA (fus)