1996 Nissan Sentra Owner's Manual - Page 135
1996 Nissan Sentra Manual
Page 135 highlights
SPARK PLUG REPLACEMENT GA16DE Engine 1. Remove brackets as necessary to give access to the high tension cables and spark plugs. 2. Disconnect the spark plug cables from the spark plugs. When disconnecting, always hold the boots, not the cables. Mark all cables to identify their original locations. DI1229M DI1017M WARNING Be sure the engine and ignition switch are off and that the parking brake is engaged securely. 3. Remove the spark plugs with a spark plug socket. The spark plug socket has a rubber seal that holds the spark plug so it does not fall when it is pulled out. Make sure each spark plug is snugly fitted into the plug socket. 4. On conventional spark plugs, check the gap on each new spark plug with a feeler gauge. (The spark plug gap is shown in the ''Technical and consumer information'' section.) Adjust the gap as required. 7-18 CAUTION Be sure to use the correct socket to remove the plugs. An incorrect socket can cause damage.