1996 Nissan Sentra Owner's Manual - Page 52

SEAT BELT EXTENDERS If, because of body size or driving position, it is not possible to properly fit the lapshoulder belt and fasten it, an extender is available which is compatible with the installed seat belts. The extender adds approximately 8 inches (200 mm) of length and may be used for either the driver or front passenger seating position. See your NISSAN dealer for assistance if the extender is required. APD0627 SEAT BELT MAINTENANCE ● To clean the belt webbings, apply a mild soap solution or any solution recommended for cleaning upholstery or carpets. Then brush the webbing, wipe it with a cloth and allow it to dry in the shade. Do not allow the belts to retract until they are completely dry. ● Periodically check to see that the belt and metal components, such as buckles, tongues, retractors, flexible wires and anchors, work properly. If loose parts, deterioration, cuts or other damage on the webbing is found, the entire belt assembly should be replaced. WARNING ● Only NISSAN belt extenders, made by the same company which made the original equipment belts, should be used with NISSAN belts. ● Persons who can use the standard seat belt should not use an extender. Such unnecessary use could result in serious personal injury in the event of an accident. Selecting correct set of belts The center seat belt buckle and tongue are identified by the CENTER label. The center seat belt tongue can be fastened only into the center seat belt buckle. 2-27