1998 Nissan Frontier Owner's Manual - Page 90
1998 Nissan Frontier Manual
Page 90 highlights
Clock operation Pressing the CLOCK button alternates the clock and the radio/cassette tape options in the display. Selecting the desired band Push the button to change from AM to FM reception. The FM stereo indicator, ST, illuminates during FM stereo reception. When the stereo broadcast signal is weak, the radio automatically changes from stereo to monaural reception. radio continues in the SEEK mode at the lowest broadcast station. SCAN tuning Push the tuning button for more than 1.5 seconds. SCAN illuminates in the display window. SCAN tuning begins from low to high frequencies and stops at each broadcasting station for five seconds. Pushing the button again during this five second period stops SCAN tuning and the radio remains tuned to that station. Clock set Depressing the CLOCK and the buttons together sets hours. Depressing the CLOCK and buttons together sets minutes. Clock priority mode In this mode the clock is shown in the display. If any radio or cassette tape functions are activated, the radio (or cassette tape) display illuminates for 10 seconds then returns to the clock mode. NOTE: After clock adjustment, the radio is in the clock priority mode. TUNE buttons WARNING The radio should not be tuned while driving in order that full attention may be given to the driving operation. Use the and buttons for manual tuning. To move quickly through the channels, hold either of the tune buttons down for more than 1.5 seconds. SEEK tuning Push the tuning button for less than 1.5 seconds. SEEK tuning begins from low to high frequencies and stops at the next broadcasting station. Pushing the button again continues the SEEK function. Once the highest broadcasting station is reached, the Radio/Cassette tape priority mode In this mode, the radio station illuminates in the display during radio operation. During cassette tape operation, TAPE illuminates in the display. Heater, air conditioner and audio systems 4-11