2003 Nissan Maxima Owner's Manual - Page 102

AUTOMATIC SEAT POSITIONER (if so equipped) AUTOMATIC SEAT POSITIONER OPERATION (A/T models only) This system is designed so that the driver's seat will automatically move when the automatic transmission selector lever is in the P (Park) position. This allows the driver to get in and out of the driver's seat more easily. When one of the following conditions is met, the driver's seat will slide backward: ¼ When the key is removed from the ignition switch. ¼ When the driver's door is opened with the key turned to ACC or LOCK. ¼ When the key is turned from ON to ACC with the driver's door open. When one of the following conditions is met, the driver's seat will return to the positions before being set. ¼ When the key is inserted into the ignition switch. ¼ When the driver's door is closed with the key turned to LOCK. PROCEDURE FOR STORING MEMORY Two positions can be stored in the automatic driver's seat positioner memory. Follow these procedures to use the memory system. SPA1385 1. A/T models: Set the automatic transmission selector lever to the P (Park) position. M/T models: Apply the parking brake securely when the vehicle is stopped. 2. Turn the ignition ON. 3. Adjust the driver's seat and steering column to the desired positions by manually operating each adjusting switch. For additional information, see "Seats" in the "1. Seats, restraints and supplemental air bag systems" section and "Steering wheel" earlier in this section. Pre-driving checks and adjustments 3-17