2005 Nissan Maxima Owner's Manual - Page 140

The display is updated every 30 seconds. For approximately the first 30 seconds and 1/3 miles (500 m) after a reset or connecting the battery cables, the display will show (----). CLOCK The digital clock displays time when the ignition key is in ACC or ON. If the power supply is disconnected, the clock will not indicate the correct time. Readjust the time. Distance to empty (dte - mile or km) The distance to empty (dte) mode provides you with an estimation of the distance that can be driven before refueling. The dte is constantly being calculated based on the amount of fuel in the fuel tank and the actual fuel consumption. The display is updated every 30 seconds. LHA0253 Adjusting the time To adjust the time, push the "H" or "M" button for more than approximately 1.5 seconds. The time indicator will flash. Touch the "H" button to adjust the hour. Touch the "M" button to adjust the minute. To finish the adjusting, press the "PREV" button or the screen will return to normal after 10 seconds. When the fuel level is low, the dte display will change to (*). NOTE: ● If the amount of fuel added while the ignition switch is OFF is small, the display just before the ignition switch is turned OFF may continue to be displayed. ● When driving uphill or rounding curves, the fuel in the tank shifts, which may momentarily change the display. HOW TO USE "FUEL ECON" BUTTON The average fuel consumption (MPG or L/100 km) and the distance to empty (dte - mi or km) will appear on the screen when the "FUEL ECON" button is pushed. HOW TO USE "E/M" (English/Metric) BUTTON You can change the unit as follows using the "E/M" button. Unit: US - mile, °F, MPG Metric - km, °C, L/100 km Average fuel consumption (MPG or L/100 km) The average fuel consumption mode shows the average fuel consumption since the last reset. Resetting is done by pressing the "TRIP RESET" or "FUEL ECON" button for more than approximately 1.5 seconds. 4-4 Display screen, heater, air conditioner and audio systems