2005 Nissan Maxima Owner's Manual - Page 161

Audio main operation The tape deck employs a permalloy head which allows for improved reproduction of high frequency ranges. Noise is also greatly reduced by the combined use of the Dolby NR (Noise Reduction) system. The auto loudness circuit enhances the low frequency range automatically in both radio reception and tape and CD playback. ON·OFF/Volume control: Turn the ignition key to ACC or ON, and then push the ON·OFF/Volume control knob while the system is off to call up the mode (radio, tape or CD) which was playing immediately before the system was turned off. To turn the system off, press the ON·OFF/Volume control knob. Turn the ON·OFF/Volume control knob to adjust the volume. This vehicle has speed sensitive control volume (SSV) for audio (type B only) . The audio volume changes as the driving speed changes. AUDIO knob (BASS, TREBLE, FADE, BALANCE, (SSV if so equipped and NR (Dolby) - Type B only)): Press the AUDIO knob to change the mode as follows: BASS → TREBLE → FADE → BALANCE → SSV (Type B only) → NR (when cassette playing, Type B only) To adjust Bass, Treble, Fade and Balance, press the AUDIO knob until the desired mode appears in the display. Turn the Tuning knob to adjust Bass and Treble to the desired level. You can also use the Tuning knob to adjust Fader and Balance modes. Fader adjusts the sound level between the front and rear speakers and Balance adjusts the sound between the right and left speakers. To change the SSV mode (Type B only) to OFF, LOW, MID or HIGH, turn the Tuning knob to right or left. To change the NR (Dolby) mode to OFF or ON, turn the Tuning knob to right or left while cassette tape is playing. When Dolby is ON, the mark is displayed. Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. Dolby NR and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Once you have adjusted the sound quality to the desired level, press the AUDIO knob repeatedly until the radio, cassette tape or CD display reappears. Otherwise, the radio, cassette tape or CD display will automatically reappear after about 10 seconds. Display CD text: To change the text displayed while playing a CD, press the AUDIO knob until "Display Mode" appears. Turn the Tuning knob within 2 seconds. The text will change as follows: Track number ←→ Track title ←→ Disc title ←→ Track number Display satellite radio text: To change the text displayed while listening to satellite radio, press the AUDIO knob until "Display Mode" appears. Turn the Tuning knob within 2 seconds. The text will change as follows: Channel number ←→ Channel name ←→ Artist ←→ Title ←→ Channel number Pause/mute button: To mute or pause the audio sound, push the PAUSE/MUTE button. To release the mute or pause, push the button again. Display screen, heater, air conditioner and audio systems 4-25