2007 Nissan Sentra Owner's Manual - Page 258

NOTE: For checking and replacing fuses on QR25DE engine models, see a NISSAN dealer. If any electrical equipment does not come on, check for an open fuse. 1. Be sure the ignition switch and the headlight switch are OFF. 2. Open the engine hood. 3. Remove the fuse box cover by pushing the tabs A and lifting the cover up from the front B . 4. Remove the fuse with the fuse puller. The fuse puller is located in the center of the fuse block in the passenger compartment. LDI0457 LDI0542 If a type A fuse is used to replace a type B fuse, the type A fuse will not be level with the fuse pocket as shown in the illustration. This will not affect the performance of the fuse. Make sure the fuse is installed in the fuse box securely. Type B fuses cannot be installed in the underhood fuse boxes. Only use type A fuses in the underhood fuse boxes. (MR20DE engine) ENGINE COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. 8-22 Maintenance and do-it-yourself