2013 Nissan Versa Owner's Manual - Page 154

● For quick cooling when the outside temperature is high, move the air intake lever to position. Be sure to return to the position for normal cooling. the 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position. AIR FLOW CHARTS The following charts show the button and dial positions for MAXIMUM AND QUICK heating, cooling or defrosting. The air intake lever position for should always be in the heating and defrosting. Dehumidified heating This mode is used to heat and dehumidify the air. 1. Move the air intake lever to the tion. 2. Turn the air flow control dial to the position. 3. Turn the fan control dial to the desired position. 4. Push the comes on. button. The indicator light posi- Operating tips ● Keep the windows and moonroof closed while the air conditioner is in operation. ● After parking in the sun, drive for 2 or 3 minutes with the windows open to vent hot air from the passenger compartment. Then, close the windows. This allows the air conditioner to cool the interior more quickly. ● The air conditioning system should be operated for approximately 10 minutes at least once a month. This helps prevent damage to the system due to lack of lubrication. ● A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction. ● If the engine coolant temperature gauge indicates engine coolant temperature over the normal range, turn the air conditioner off. See "If your vehicle overheats" in the "In case of emergency" section of this manual. 5. Turn the temperature control dial to the desired position. Dehumidified defogging This mode is used to defog the windows and dehumidify the air. 1. Move the air intake lever to the tion. 2. Turn the air flow control dial to the position. posi- Display screen, heater, air conditioner, audio and phone systems 4-17