2013 Nissan Versa Owner's Manual - Page 215

When the ignition switch cannot be placed to the LOCK position: 1. Shift the shift selector to the P (Park) position. 2. Move the ignition switch slightly in the ON direction. 3. Turn the ignition switch to the LOCK position. 4. Remove the key if it is inserted in the ignition switch. If the ignition switch is placed to the LOCK position, the shift selector cannot be moved from the P (Park) position. The shift selector can be moved if the ignition switch is in the ON position and the foot brake pedal is depressed. 1 between the There is an OFF position ᭺ LOCK and ACC positions. The OFF position is indicated by a "1" on the key cylinder. To lock the steering wheel, place the ignition switch in the LOCK position. Remove the key. To unlock the steering wheel, insert the key and turn it gently while rotating the steering wheel slightly right and left. IGNITION SWITCH POSITIONS LOCK: Normal parking position (0) OFF: (1) The engine can be turned off without locking the steering wheel. ACC: (Accessories) (2) SSD0503 MANUAL TRANSMISSION (if so equipped) The ignition switch includes a device that helps prevent accidental removal of the key while driving. The key can only be removed when the ignition switch is in the LOCK position. In order for the steering wheel to be locked, it must be turned about 1/8 of a turn clockwise from the straight up position. This position activates electrical accessories such as the radio when the engine is not running. ON: Normal operating position (3) This position turns on the ignition system and the electrical accessories. START: (4) This position starts the engine. As soon as the engine has started, release the key. It automatically returns to the ON position. 5-8 Starting and driving