2014 Nissan Pathfinder Owner's Manual - Page 501

CONTINUOUSLY VARIABLE TRANSMISSION (CVT) FLUID 5. Wipe the engine oil filter sealing surface with a clean rag. CAUTION ● Use only Genuine NISSAN CVT Fluid NS-3. Do not mix with other fluids. ● Using transmission fluid other than Genuine NISSAN CVT Fluid NS-3 will damage the CVT, which is not covered by the warranty. When checking or replacement of CVT fluid is required, we recommend your NISSAN dealer for servicing. CAUTION ● Be sure to remove any old gasket material remaining on the sealing surface of the engine. Failure to do so could lead to an oil leak and engine damage. ● The dipstick must be inserted in place to prevent oil spillage from the dipstick hole when filling the engine with oil. LDI2143 CHANGING ENGINE OIL FILTER 1. Park the vehicle on a level surface and apply the parking brake. 2. Turn the engine off. A with an oil filter 4. Loosen the oil filter ᭺ wrench by turning it counterclockwise. Then remove the oil filter by turning it by hand. A. 3. Place a large drain pan under the oil filter ᭺ 6. Coat the gasket on the new filter with clean engine oil. 7. Screw on the oil filter until a slight resistance is felt, then tighten an additional 2/3 turn. 8. Start the engine and check for leakage around the oil filter. Correct as required. 9. Turn the engine off and wait more than 10 minutes. Check the oil level. Add engine oil if necessary. CAUTION Be careful not to burn yourself. The engine oil may be hot. Maintenance and do-it-yourself 8-11