1997 Oldsmobile Cutlass Supreme Owner's Manual - Page 86

To signal a lane change, just raise or lowerthe lever until the arrow starts to flash. Hold it there until you complete your lane change. The lever will return by itself when you release it. Headlamp High/Low Beam To change the headlamps from low beam to high beam, push forward on the turn signaUmultifunction lever. To change the headlamps from high beam to low beam,pull the turn signal lever backward. When the high bearns are a on, light on the instrument panel also will be on. A warning chime signal will come on if you have left your turn signal on for more than 3/4 mile (1 km). As you signal a turn or lane a change, if the arrow flashes rapidly, a signal bulb may be burned out and other drivers won't see your turn signal. If a bulbis burned out, replaceit to help avoid an accident. If the arrow doesn't go on at all when you signal a turn, check for burned-out bulbs and then check the fuse (see "Fuses and Circuit Breakers" in the Index). I Flash to Pass I This feature lets you use your high-beam headlamps to signal a driver in front of you that you want to pass. To use it, pull the turn signaYmultifunction lever toward you until the high-beam headlamps come on, then release the lever to turn them off.