2006 Pontiac G6 Owner's Manual - Page 319

4. Remove the bulb access cover by turning it counterclockwise. 5. Turn the bulb socket counterclockwise and pull out the bulb assembly. 6. Disconnect the bulb socket from the wiring harness for headlamps. For the front turn signal/parking or sidemarker bulbs, unclip the bulb from the socket. 7. Install a new bulb. 8. Reverse Steps 1 through 4 to reinstall the bulb assembly and headlamp assembly. 4. Remove the beauty cover by pressing the tabs at either end with a tool. 5. Remove the bulb by turning it counterclockwise. 6. Install a new bulb. 7. Reverse Steps 3 through 5 to reinstall the bulb assembly. Center High-Mounted Stoplamp (CHMSL) (Sedan) To replace a center high-mounted stoplamp (CHMSL) bulb, do the following: 1. Open the trunk lid. See Trunk on page 2-14 for more information. 2. Locate the center high-mounted stoplamp (CHMSL) on the inside of the trunk lid. 3. Unclip the wiring harness by using a tool to disengage the connector. Center High-Mounted Stoplamp (CHMSL) (Retractable Hardtop and Coupe) If your vehicle has this component and it needs replacement, it is recommended that it be replaced as a unit by your dealer. 5-51