2006 Pontiac G6 Owner's Manual - Page 352

6. With the yellow cap in place to prevent the wheel from being scratched, screw the bolt extension onto the bolt through the wheel nut hole. 7. Remove the yellow cap from the bolt extension. 8. Secure the tire and wheel with the larger wing nut. 3. Place the jack over the bolt (A) on the floor, making sure it contacts the bolt as shown, and thread the jack retainer nut until it contacts the jack. When reinstalling the jack in the trunk area, ensure that the flat edge with the label is aligned with the rear of the vehicle. If it is not aligned properly, the tire will not fit correctly. 4. With the valve stem up, place the tire on the compartment floor with the rear of the tire beneath the trim panel (tire may not lay completely flat). 5. Line up a wheel nut hole with the bolt or wheel center. A. B. C. D. Cover Wing Nut Bolt Extension Spare Tire E. Nut F. Jack G. Bolt 5-84