2006 Pontiac Montana SV6 Owner's Manual - Page 18

Reinstalling the Bucket Seats To reinstall the bucket seats, do the following: 1. With the seat folded, squeeze the angled bar beneath the seat toward the straight crossbar, while placing the front hooks of the seat into the front two floor pins. 2. Make sure the seat is angled so that the front seat hooks clear the floor pins. If the front hooks are not attached correctly, the seat's rear hooks will not attach to the rear set of floor pins. {CAUTION: A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After installing the seat, always check to be sure that the safety belts are properly routed and attached, and are not twisted. Do not install the seat facing the rear of the vehicle, as it will not lock into place. If more storage room is needed behind the seat, slide the seat forward. Make sure the seat is in the full rear position before beginning this procedure. If the front hooks are not attaching correctly, check that the seat is in the full rear position. 1-12