2009 Pontiac G6 Owner's Manual - Page 140

Headlamp High/Low-Beam Changer To change the headlamps from low beam to high beam, push the turn signal/multifunction lever away from you. This instrument panel cluster light 3 comes on if the high beam lamps are turned on while the ignition is in ON/RUN. To change the headlamps from high beam to low beam, pull the turn signal lever toward you. Windshield Wipers Flash-to-Pass This feature lets the high-beam headlamps be used to signal a driver in front of you that you want to pass. Pull the turn signal/multifunction lever toward you until the high-beam headlamps come on, then release the lever to turn them off. The windshield wiper lever is located on the right side of the steering wheel. Move the lever to control the windshield wipers. 9 (Off): Turns off the windshield wipers. & (Intermittent; Speed Sensitive Wipers): For intermittent or speed sensitive operation. The amount of delay time varies between wiping cycles due to the delay setting selected or the speed of the vehicle. As vehicle speed is increased or decreased, the wiper interval also increases or decreases. 3-8