2009 Pontiac G6 Owner's Manual - Page 291

6. Turn the bulb socket counterclockwise and pull out the bulb assembly. 7. Disconnect the bulb socket from the wiring harness for headlamps. For the front turn signal/parking or sidemarker bulbs, unclip the bulb from the socket. 8. Install a new bulb. 9. Turn the bulb access cover clockwise to reinstall it. 10. Push the headlamp assembly back into the vehicle making sure to align the ball stud into its retainer. 11. Push the front fascia back into its original location. 12. Reinstall the plastic push pins on the top of the tire bar. 13. Reinstall the two screws that secure the headlamp assembly. 4. Remove the cover by pressing the tabs at either end with a tool. 5. Remove the bulb by turning it counterclockwise. 6. Turn the bulb clockwise to install it. 7. Reinstall the cover and reconnect the wiring harness. Center High-Mounted Stoplamp (CHMSL) (Sedan) To replace a center high-mounted stoplamp (CHMSL) bulb: 1. Open the trunk. See Trunk on page 2-12. 2. Locate the center high-mounted stoplamp (CHMSL) on the inside of the trunk lid. 3. Disconnect the wiring harness. Center High-Mounted Stoplamp (CHMSL) (Retractable Hardtop and Coupe) If your vehicle has this component and it needs replacement, it is recommended that it be replaced as a unit by your dealer/retailer. 5-53