2009 Pontiac G6 Owner's Manual - Page 333

5. Raise the jack to the height shown and lock the wrench onto the jack. An outline of the jack showing the proper height is printed on the insulation in the bottom of the spare tire well. 6. Place the jack over the bolt (A) on the floor, making sure it contacts the bolt. Thread the jack retainer nut until it contacts the jack. 7. With the valve stem up, place the tire on the compartment floor with the rear of the tire under the trim panel. The tire may not lay completely flat. 8. Line up the bolt with the wheel center. 9. With the yellow cap in place to prevent the wheel from being scratched, screw the bolt extension onto the bolt through the wheel center hole. 10. Remove the yellow cap from the bolt extension. 11. Secure the tire and wheel with the larger wing nut. 5-95