2007 Saab 9-3 Owner's Manual - Page 92

92 Instruments and controls Speed warning This value is preset to 55 mph (90 km/h). The value can be set to between 0 and 150 mph (0 and 250 km/h). 1 Select Speed W using the steering wheel controls, or . 2 Press and hold the SET button until given audible confirmation. 3 Adjust the speed using the steering wheel controls. 4 Confirm the setting by pressing the SET button. Go back/modify using the CLR-button. The word ON on the right-hand side of the display indicates when the speed warning function is active. An audible alarm will sound if the set speed is exceeded. Disengage the function with the CLR button. Re-engage the function using the SET button. Calculating the arrival time (When will I arrive if I know how far I have to drive?) This function should be used before starting out a journey. To calculate the arrival time, the distance must first be given. 1 Select Dist using the steering wheel controls, or . 2 Press and hold the SET button until given audible confirmation. 3 Set the distance to the destination using the steering wheel controls. 4 Confirm the setting by pressing the SET button. The calculated arrival time will now appear on the right-hand side of the display. If you take a break, this time will be added to the previously calculated arrival time. Resetting a single function 1 Select the function you wish to reset using the steering wheel controls, or . • Fuel Ø (the value is rest to 10l/100 km) • Speed Ø • Trip (Dist used as trip meter) 2 Press and hold the CLR button for approx. 1 second. The selected function will now be reset. Resetting the trip computer Press and hold the CLR button (approx. 3 seconds) until audible confirmation is given. The following functions will be rest: • Fuel Ø (the value is reset to 10l/ 100 km) • Speed Ø • D.T.E. (the value is reset to the distance possible on the remaining fuel if fuel consumption is 10l/100 km, lower consumption means a longer possible distance) • Trip (Dist used as trip meter)