2008 Saab 9-7X Owner's Manual - Page 308

Front Turn Signal, Sidemarker and Parking Lamps To replace one of these bulbs: 1. Follow Steps 1 through 3 under Headlamps on page 5-53 to access the front turn signal, sidemarker or parking lamp. 2. Turn the bulb socket counterclockwise and remove it from the lamp assembly. 3. Holding the socket, pull the old bulb to release it from the socket. 4. Push the new bulb into the socket until it clicks. 5. Remove the bulb socket that needs to be replaced by turning it counterclockwise. 6. Disconnect the electrical connector from the old bulb. 7. Plug the electrical connector into the new bulb using care not to touch the glass with your fingers. 8. Install the new bulb socket and turn it clockwise to secure. 9. Reinstall the bulb covers. 10. Reverse Steps 1 through 4 to reinstall. 11. Press down on the retaining clips to secure the headlamp assembly. 5-54 5. Insert the bulb socket into the lamp assembly and turn it clockwise to secure. 6. Reinstall the headlamp assembly by lining up the headlamp assembly with the slots in the headlamp retaining clips. 7. Press down on the headlamp retaining clips to secure the headlamp assembly.