2008 Saab 9-7X Owner's Manual - Page 9
2008 Saab 9-7X Manual
Page 9 highlights
To store the easy exit seat position, do the following: 1. Press and release the 1 or 2 button of the memory control for less than three seconds. The seat will move to the stored memory position. 2. Adjust the seat to the desired exit position. 3. Press and hold the easy exit seat button for more than three seconds. A double chime will sound to let you know that the position has been stored for the selected button 1 or 2. To repeat the procedure for a second driver, follow the preceding steps, but press the other numbered memory control button. To recall the easy exit seat position, do one of the following: Power Reclining Seatbacks The front seats have power reclining seatbacks. Use the vertical power seat control located on the outboard side of the seat to operate them. • To recline the seatback, press the control toward the rear of the vehicle. • Press the easy exit seat button on the memory control while the vehicle is in PARK (P). The seat will move to the stored exit position. • To raise the seatback, press the control toward the front of the vehicle. • Or, if the easy exit seat feature is activated in the Driver Information Center (DIC), removing the key from the ignition will move the seat to the exit position. See "Easy Exit Seat" under DIC Vehicle Customization on page 3-53 for more information on activating this feature in the DIC. If an easy exit seat position has not been stored, the default position is all the way rearward. 1-5