1998 Subaru Legacy Owner's Manual - Page 198

B Function display mode When the function display mode is selected, the time is not shown on the display. The display indicates the current function only. J Setting the time 1. Turn the ignition switch to "ACC" or "ON". 2. Select the time display mode by pressing the "DISP" button for more than 0.5 second. 3. To adjust hour: Press the "DISP" button and the "H" button together to advance the hours in one-hour increments. Keeping the buttons pressed advances the hours quickly. 4. To adjust minute: Press the "DISP" button and the "M" button together to advance the minutes in one-minute increments. Keeping the buttons pressed advances the minutes quickly. NOTE If the connection between the radio and battery is broken for any reason such as vehicle maintenance or radio removal, the time setting will be cleared. If this occurs, it is necessary to reset the time. Installation of accessories Always consult your SUBARU dealer before installing a citizen band radio or other transmitting device in your vehicle. Such devices may cause the electronic control system to malfunction if they are incorrectly installed or if they are not suited for the vehicle. 5-46