2008 Subaru Legacy Owner's Manual - Page 30

Seat, seatbelt and SRS airbags 1-5 switch. ! Seat height adjustment (Driver's seat) . Height of seat ! Registration of seat position WARNING . Never adjust the seat while driving to avoid the possibility of loss of vehicle control and of personal injury. . Before adjusting the seat, make sure the hands, feet and possessions of rear seat passengers are clear of the adjusting mechanism. . Before registering the seat position, confirm that the shift lever is in the "P" position (AT models) or the parking brake lever is applied (MT models). 1. Shift the shift lever in the "P" position (AT models) or apply the parking brake (MT models). 2. Adjust the seat position. To adjust the angle of the seatback, move the control switch. ! Seat cushion angle adjustment (Driver's seat) To adjust the seat height, pull up or push down the rear end of the control switch. & Memory function (Driver's seat, if equipped) Two of your favorite seat positions can be registered. Register the seat position with button "1" or "2" and retrieve the seat position by pressing either button. The following seat positions can be registered: . Forward/backward position of the seat . Angle of seatback . Angle of seat cushion To adjust the seat cushion angle, pull up or push down the front end of the control - CONTINUED -