2008 Subaru Legacy Owner's Manual - Page 64

Seat, seatbelt and SRS airbags 1-39 4. Tighten the top tether securely. CAUTION Do not route the top tether over the head restraint. It may happen that the top tether cannot be fastened tightly. When the child restraint system is to be secured using the top tether, pass the top tether under the head restraint between the head restraint stay posts. If the top tether still cannot be fastened tightly, remove the head restraint. ! Station wagon seating position where the child restraint system has been installed with the seatbelt or lower anchorages; lift up the head restraint while pressing the release button. Store the head restraint in the cargo area. Avoid placing the head restraint in the passenger compartment to prevent it from being thrown around in the passenger compartment in a sudden stop or a sharp turn. 3. Fasten the top tether hook of the child restraint system to the appropriate upper anchorage. 4. Tighten the top tether securely. CAUTION Always remove the head restraint when mounting a child restraint system with a top tether. Otherwise, it may happen that the top tether cannot be fastened tightly. 2. Open the cover flaps to use the anchorages. 1. Remove the head restraint at the