3Com 2848 SFP User Guide - Page 28
Changing the Admin Password, Management Software Information - Shows
UPC - 662705502243
View all 3Com 2848 SFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
28 CONFIGURING THE SWITCH Information that you can view on the Summary screen include: ■ System Information - Contains optional fields that you can fill out to identify the Switch. It also shows the object ID and the time elapsed since the Switch was last started. After you update any of the editable fields in this section, click Apply to save your changes. ■ IP Information - Shows the IP address settings of the Switch. To modify any of these settings, click IP Settings. This takes you to the IP Settings screen, shown in Figure 10 on page 30. ■ Switch Information - Shows the serial number, total number of ports, and the version of the hardware (board) on the Switch. ■ Management Software Information - Shows the versions of the loader (firmware), and the operation code version. Changing the Admin Password To prevent unauthorized users from accessing the Web interface and modifying the Switch's settings, the interface is password-protected. The default admin account settings are: ■ User name - admin ■ Password - blank (no password) To ensure that unauthorized users do not access the Web interface, 3Com recommends that you set an admin password when you first configure the Switch. Figure 9 Password Screen