3Com 3824 Implementation Guide - Page 21
Aggregated Links and Your Switch, via LACP it will adopt the configuration settings of the aggregated
UPC - 662705467528
View all 3Com 3824 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Aggregated Links 21 member of an aggregated link for Switch A in error, LACP (if it is enabled) will detect this and place the port in the aggregated link for Switch B, thus overriding the manual configuration. Figure 3 Aggregated Link - Example ■ LACP Automatic Aggregations - If LACP detects at least two active ports sharing the same partner device, and if no matching pre-configured aggregated links exist, LACP will automatically assign a free un-configured aggregated link to form an aggregated link with the partner device. If you have an existing single port connection between two devices, this automatic behavior allows quick and easy addition of extra bandwidth by simply adding an extra physical link between the units. The Spanning Tree costs for a port running LACP is the cost assigned for an aggregated link running at that speed. As required by the IEEE Std 802.3-2002 (incorporating 802.3ad), no changes in cost are made according to the number of member links in the aggregated link. Aggregated Links and Your Switch ■ When any port is assigned to an aggregated link (either manually or via LACP) it will adopt the configuration settings of the aggregated link. When a port leaves an aggregated link its original configuration settings are restored. ■ A maximum of six active aggregations can be created. A maximum of up to eight ports may be added manually to any individual aggregation, or via LACP. There are however a few points to consider: