3Com 3824 Implementation Guide - Page 67
VLAN Configuration Examples, Using Untagged Connections, Using Untagged, Connections
UPC - 662705467528
View all 3Com 3824 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
VLAN Configuration Examples 67 identify which packets belong in which VLANs. To communicate between VLANs a router must be used. VLAN Configuration Examples This section contains examples of VLAN configurations. It describes how to set up your Switch to support simple untagged and tagged connections. Using Untagged Connections The simplest VLAN operates in a small network using a single switch. In this network there is no requirement to pass traffic for multiple VLANs across a link. All traffic is handled by the single Switch and therefore untagged connections can be used. The example shown in Figure 18 illustrates a single Switch connected to endstations and servers using untagged connections. Ports 1, 2 and 3 of the Switch belong to VLAN 1, ports 10, 11 and 12 belong to VLAN 2. VLANs 1 and 2 are completely separate and cannot communicate with each other. This provides additional security for your network. Figure 18 VLAN configuration example: Using untagged connections