3Com 3CRWE80096A User Guide - Page 37
Setting up a MAC Address Access List, Defining RADIUS Servers, Configuring for SNMP Management - reset
UPC - 662705441221
View all 3Com 3CRWE80096A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Setting up a MAC Address Access List 31 s Deleting users-To delete users, check the boxes next to the users you want to delete and click Delete. If you click Reset, all checked boxes are cleared and you may reselect which users to delete from the list. s Modify Passwords-To modify a password, select the button next to the user name click Change. Change the password in the spaces provided and click OK. If you click Undo, all password fields are cleared and you may type another password. Setting up a MAC Address Access List The MAC address access list is only required if you use the Access Point Local MAC Authentication/Encryption security setting. Up to 1000 client MAC addresses can be stored in this list. If a client's MAC address is not on the list, that client cannot associate with the access point. s Adding MAC addresses-You must supply a MAC address for each client. s Deleting MAC addresses-To delete MAC addresses, check the boxes next to the addresses you want to delete and click Delete. If you click Reset, all checked boxes are cleared and you may reselect which users to delete from the list. Defining RADIUS Servers The RADIUS Server Setup page lets you define the servers to be used for RADIUS authentication and accounting functions. These include RADIUS authentication servers, dynamic key exchange servers, and accounting servers. If you enter an invalid IP address for any of the servers, an error message is displayed. Once an accounting server is set up, you can turn accounting on or off from this page. If the servers are set up and accounting is turned off, the settings remain saved. To set up the servers, you will need to specify a valid IP address as well as the port and shared secret for the primary and secondary servers your network uses for authentication, dynamic key exchange, and accounting. Secondary servers are optional. The authentication scheme implemented at your site determines which servers you must set up: s If you are using EAP-MD5, you must set up the RADIUS authentication server information. s If you are using EAP-TLS, you must set up the dynamic key exchange server information. s If you are using Serial Authentication, you must set up both the RADIUS authentication server and the dynamic key exchange server. Configuration of the RADIUS accounting server is optional. Configuring for SNMP Management The SNMP Management page lets you set up the configuration for using the access point in conjunction with third-party SNMP management programs. From this page, you can: s Modify the Read Only (default "public") or Read/Write (default "private") community names. Activation of either Modify button displays the corresponding page where the community names can be set. s Identify one or two host machines to receive SNMP traps.