AMD ADA4200DAA5BV Builders Guide - Page 41
Appendix A, AMD Athlon™ 64, Processor-Based System Build, Procedure
UPC - 683728133160
View all AMD ADA4200DAA5BV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
31684 Rev. 3.00 September 2004 Builder's Guide for AMD Athlon™ 64 ProcessorBased Desktops and Workstations Appendix A AMD Athlon™ 64 Processor-Based System Build Procedure Always verify that the system you are building only uses components from the list recommended by AMD, or follow the recommendations outlined in this document to select a suitable component, and then follow this procedure to build your system For additional configuration information, go to: http://www.amd.com/us-en/Processors/TechnicalResources/0,,30_182_869_9460,00.html In EMEA, please go to: http://www.amd.com/gb-uk/Processors/ProductInformation/0,,30_118_9485_9487,00.html Note: If the links in this appendix produce an Error 404 - Page Not Found message, copy the link, paste it into the Address line of your browser, and connect to the Web site from your browser. 1. Ensure the selected motherboard is appropriate for the chosen processor model and frequency. 2. Verify that your case follows the system case (chassis) airflow guidelines on the AMD website. 3. Calculate the power requirements for the intended configuration prior to selecting and installing a power supply. Note: Ensure that the power supply wattage selected meets the intended configuration requirement and the motherboard and chassis are electrically and mechanically compatible. 4. Ensure that you are properly grounded at all times during the system construction to protect the delicate electronic components from static electricity damage. 5. Install the selected hard drives, floppy disk drives, DVD or CD-ROM player, and other devices into the chassis. Note: Check the hard drive installation guide. For full performance, you must also install the appropriate data cable (see drive installation instructions). 6. Remove the motherboard from its protective packaging and place it on a firm (but not hard) surface-ideally the surface will be a grounded anti-static pad. Appendix A AMD Athlon™ 64 41 Processor-Based System Build Procedure