ATI 9000 User Guide - Page 30
Starting Windows, with TV Display Enabled, Using SCART Connectors for European TVs, How To Enable/
UPC - 727419410366
View all ATI 9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
26 Starting Windows® with TV Display Enabled The TV screen may become scrambled during the initial Windows® logo display. This is only a temporary effect and your screen will be restored within a few seconds. During start up, your card will go through a sequence of mode settings, during which your TV display will remain blank. This process takes only a few seconds and helps program the TV display. Using SCART Connectors for European TVs Audio In (Right = red) (Left = white) Connect to TV or VCR Audio Cable Connect to PC Audio Out SCART CONNECTOR Composite Cable or S-Video-to-Composite Adapter Cable Connect to PC Composite Video-In (yellow) TV Output The above illustration shows how to connect your PC to a European TV using the SCART. The SCART connector supports only the Composite video format. If your version of RADEON only has the S-Video connector, you will have to use an S-Video-to-Composite video adapter cable If your European TV has S-Video In, you can use an S-Video cable to connect directly to the TV rather than through the SCART connector. The RADEON 9000 PRO that only has the Composite out connector DOES NOT support connection to TVs with S-Video In. How To Enable/Disable The TV Display 1 Access the Windows® Control Panel. Doubleclick Display.