ATI V3200 User Guide - Page 12

6 Turn off the computer, monitor, and other peripheral devices. Turn off the computer, monitor, and other peripheral devices. 7 Unplug the computer's power cord and disconnect all cables from the back of your computer. L WARNING - Wait approximately 20 seconds after unplugging the power cord before disconnecting a peripheral or removing a component from the motherboard to avoid possible damage to the motherboard. 8 Remove the computer cover. If necessary, consult your computer's manual for help in removing the cover. L WARNING - Remember to discharge your body's static electricity by touching the power supply or the metal surface of the computer chassis. 9 Unscrew or unfasten and remove any existing graphics card from your computer. Note: If your computer has an on-board graphics capability, you may need to disable it on the motherboard. For more information, see your computer documentation. 10 Locate the appropriate slot and, if necessary, remove the metal back- plate cover. 11 Align your ATI graphics card with the slot and press it in firmly until the card is fully seated. 12 Screw in or fasten the graphics card securely and replace the computer cover. 13 Reconnect any cables you have disconnected and plug in the computer's power cord. 14 Turn on the monitor and then your computer. Connecting Display Devices The following connections are available: