ATI V3200 User Guide - Page 22

16 ATI Displays Tab ATI Displays Tab Scheme Hotkey Display Configuration button Save button Delete button Display buttons Displays the drop-down list of available display-device configurations that have previously been created. New configurations can be entered here and then saved using the Save button. Associates a hotkey with a scheme. To input the hotkey, highlight the field and press the appropriate key combination on your keyboard. These are the buttons that contain the name of the devices that can be connected to your graphics card, such as Monitor, Panel, FPD, TV or YPrBr. Clicking on any of these buttons opens further options to refine your display on that device. Only the type of devices supported by your graphic card will be displayed as valid options. If the text on the button is greyed out, that device is not currently connected to your graphics card. Saves display-device configuration schemes. Deletes display-device configuration schemes. Enables or disables a display device; they also indicate whether a device is enabled or disabled. To enable or disable a display If the enable/disable button is green, it indicates the device is enabled. If it is red, it indicates the device is disabled. If the button is greyed out, the device is not an option. For example, if there is only one monitor connected, all buttons will be grey. 1 Click the enable/disable button want to enable/disable. for the display device you 2 Click OK or Apply to save the changes. Note: Due to power restrictions, you can normally only have two devices active at the same time; for example, two monitors or a monitor and a TV. To save a display-device scheme Display-device selections can be saved as a scheme for quick recall.