Acer H9500BD User Manual - Page 34
Image
View all Acer H9500BD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
English 24 Note: AcuMotion may not work under some conditions: while 3D function is on and the the frame rate is not HDMI 1.4a 1080@24P frame packing and 3D HQFS timings. Note: The setting "High" in Dynamic Black may cause brightness flickers while playing big brightness dynamic range video contents. Image Projection Front-Desktop • The factory default setting. Aspect Ratio Keystone Front-Ceiling • When you select this function, the projector inverts the image for ceiling-mounted projection. Rear-Desktop • When you select this function, the projector reverses the image so you can project from behind a translucent screen. Rear-Ceiling • When you select this function, the projector reverses and inverts the image at same time. You can project from behind a translucent screen with ceiling mounted projection. Use this function to choose your desired aspect ratio. • Auto: Keep the image with original width-higth ratio and maxi mize the image to fit native horizontal or vertical pixels. • 4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. • 16:9: The image will be scaled to fit the width of the screen and the height adjusted to display the image using a 16:9 ratio. • L. Box: Keep original signal aspect ratio and zoom in by 1.333 times. Adjust image distortion caused by tilting projection. (±15 degrees) H. Position (Horizontal position) • Press • Press to move the image left. to move the image right.