Acer H9500BD User Manual - Page 35

English 25 V. Position • (Vertical position) • Press Press to move the image down. to move the image up. Frequency Tracking HDMI Scan Info 2D to 3D 3D 3D Format 3D Sync Invert 3D Warning Message "Frequency" changes the projector's refresh rate to match the frequency of your computer's graphics card. If you can see a vertical flickering bar in the projected image, use this function to make the necessary adjustments. Synchronizes the signal timing of the projector with the graphics card. If you experience an unstable or flickering image, use this function to correct it. Adjust the overscan ratio of the HDMI image on screen. • Auto: Automatically adjust by information from player. • Underscan: Always no overscan on HDMI image. • Overscan: Always keep overscan on HDMI image. 2D to 3D Support most of the 2D contents. Choose "On" to enable 2D to 3D function supported by DLP 3D technology. Please use DLP 3D glasses to have correct performance. Mode Choose mode of "Photo", "Movie", "Jump-Out" and "User" as your prefered 3D setting. Convergence Choose convergrence effect of "Inward", "Middle" and "Outword" as your preferred 3D setting in "User" mode. Depth Choose depth effect of "Low", "Middle" and "Strong" as your prefered 3D setting in "User" mode. Choose "On" to enable DLP 3D function. • On: Choose this item while using DLP 3D glasses, quad buffer (NVIDIA/ATI...) graphic card and HQFS format file or DVD with corresponding SW player. • Off: Turn off 3D mode. Adjust the 3D format to display 3D content correctly. If you see a discrete or overlapping image while wearing DLP 3D glasses, you may need to execute "Invert" to get best match of left/ right image sequence to get the correct image (for DLP 3D). Choose "Yes" to display the 3D warning message. Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under HDMI, DVI or Video mode. Note: "HDMI Scan Info" function is only supported under HDMI mode. Note: "Depth" and "Convergence" are only supported under User mode. Note: "3D Format" is not supported under Computer or Video mode. Note: It needs correct settings on graphic card 3D application program for correct 3D display.