Acer H9500BD User Manual - Page 39
PIP, PIP Source, PIP Location and PIP Size functions, is unavailable. - service menu
View all Acer H9500BD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
English 29 VGA OUT (Standby) Auto Screen Reset PIP PIP Source PIP Location PIP Size User password • Press to setup or change the "User Password". • Press number keys to set your password on the remote control and press "MENU" to confirm. • Press to delete character. • Enter the password when you see "Confirm Password" displayed. • The password should be between 4 and 8 characters long. • If you select "Request password only when plugging the power cord in.", the projector will prompt the user to enter the password every time the power cord is plugged. • If you select "Always request the password when turning the projector on.", the user has to enter the password every time when the projector is turned on. Administrator Password The "Administrator Password" can be used in both the "Enter Administrator Password" and "Enter Password" dialog boxes. • Press to change the "Administrator Password". • The factory default of "Administrator Password" is "1234". If you forgot your administrator password, do the following to retrieve the administrator password: • An unique 6-digit "Universal Password" which is printed on the Security Card (please check accessory in the box). This unique password is the number which will be accepted by projector anytime no matter what the Administrator Password is. • If losing this security card and number, please contact with an Acer service center. • Default is "Off". Choose "On" to enable VGA OUT connection. • Default is "On", the down/up move of electronic screen will be related with power on/off of Projector. • Press the button and choose "Yes" to return the parameters on all menus to the factory default settings. • Choose "On" to see two screens at the same time. • Choose "Off" to disable the function. Press and to choose the secondary video source: Composite, S-Video or Component signal. Choose the PIP secondary signal location on the display screen. Choose the PIP secondary signal size on the display screen. Note: When PIP function is activated, zoom and keystone function is unavailable. Note: "PIP", " PIP Source", "PIP Location" and "PIP Size" functions are only supported under HDMI or DVI mode.